stress-ng (0.06.07-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-msg: add in IPC_INFO, MSG_INFO, MSG_STAT msgctl calls
  * stress-vecmath: add more ops to make vecmath more demanding
  * stress-sync-file: sync on mode rather than on the sync_modes index
  * stress-opcode: use __builtin___clear_cache to avoid clang warning
  * stress-get: fix typo on syscall name
  * replace mfence with __sync_synchronize builtin
  * stress-bigheap: remove redundant call to stress_get_pagesize

 -- Colin King <colin.king@canonical.com>  Fri, 24 Jun 2016 09:56:23 +0100

stress-ng (0.06.06-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-shm-sysv: don't msync on GNU HURD, it is not implemented
  * stress-shm: don't msync on GNU HURD, it is not implemented
  * stress-ng: build in OPT_MEMFD_BYTES case if STRESS_MEMFD defined
  * manual: fcntl: add in missing locking commands
  * stress-socket: add --sock-type socket type option
  * Add Linux open file description locks stressor
  * Add POSIX advisory locking stressor
  * stress-fcntl: add more locking fcntl commands
  * man page: add --taskset example
  * stress-memfd: add better termination exit points, don't fail on EXNIO
  * stress-memfd: add a --memfd-bytes size specifier option
  * perf + Makefile: Add some smarts to detect available perf enums
  * stress-shm: msync the shm region
  * stress-shm-sysv: msync the shm region
  * stress-memfd: add hole punching to memory
  * stress-mremap: add MAP_FIXED remappings
  * stress-memfd: add random madvise to add some more page stress
  * stress-memfd: add seeks to memfd stressor
  * stress-xattr: rename name to attrname to stop shadowing on name
  * Update README stress test count
  * Add in missing seccomp from the --help info
  * Add a fcntl SEAL command stressor
  * README: update number of tests
  * time_now: return -1.0 for failed time fetch
  * stress-get: add getcpu system call
  * stress-dup: only close fd's that are open

 -- Colin King <colin.king@canonical.com>  Fri, 10 Jun 2016 12:36:33 +0100

stress-ng (0.06.05-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-mmap: ensure we don't leak fd, cleanup on exit
  * fast-test-all: don't run exec test
  * stress-mremap: catch SEGV and OOM restarts
  * stress-mmap: catch SEGV and OOM restarts
  * fast-test-all: exclude pty
  * Revert "stress-mremap: add random MAP_FIXED option to mremap"
  * stress-zero: #if def around ptr declarion for non-Linux systems
  * stress-zero: only perform /dev/zero mmapping on Linux
  * stress-cacheflush: remove sys_cacheflush for non linux systems
  * stress-shm-sysv: SHM_INFO and IPC_INFO are linux only
  * stress-cache: only call cacheflush on Linux systems
  * stress-filename: filename option should be from the .opt field
  * stress-rtc: fix some overly pedantic warnings from cppcheck
  * stress-shm: sync, expand and shrink shm region, extra stress
  * stress-open: use different forms of open flag combinations
  * stress-zero: mmap /dev/zero and check if the contents is zero
  * stress-pipe: sanity check pipe size setting
  * stress-dup: add dup2 on same fd exerciser
  * stress-fcntl: add some more fcntl commands
  * stress-seek: add SEEK_CUR, SEEK_END seek options
  * stress-utime: exercise UTIME_NOW and UTIME_OMIT settings
  * stress-userfaultfd: add poll to add some more kernel coverage
  * Add stress_set_nonblock to set fd to non-blocking I/O
  * stress-userfaultfd: add in zeropage handling
  * stress-mremap: add random MAP_FIXED option to mremap
  * stress-readahead: remove redundant if defined() checks on fadvise
  * Add SIGHUP trapping and send SIGALRM to all processes on death
  * stress-personality: only print number of personalities in instance 0
  * syscalls: update pause information
  * stress-cache: use cacheflush() on systems that provide this syscall
  * syscalls: update ioctl entry
  * perf: add "per" / marking for per second
  * Add pty stressor
  * Add semtimedop to syscalls, it is present in stress-sem-sysv.c
  * stress-cap: add capset call for current stressor process
  * stress-shm-sysv: add some additional exercising of shmctl commands
  * stress-sem-sysv: exercise more of the semctl commands
  * Add trivial chown stressor
  * stress-dup: use dup3() on linux if it is available
  * Makefile: vecmath: make the file touch silent
  * stress-key: add request_key system call
  * syscalls: update pipe2 entry, this is now being exercised by stress-pipe
  * stress-mq: memset sigev to zero
  * stress-madvise: only build in if STRESS_MADVISE defined
  * Add madvise stressor
  * syscalls: add mq_timedsend to mq
  * stress-mq: use timed and non-timed versions of send/receive
  * stress-mq: add mq_notify calls every 1024 iterations
  * stress-link: lstat the link
  * Widen metrics dump stressor name field to 13 chars

 -- Colin King <colin.king@canonical.com>  Fri, 27 May 2016 11:37:09 +0100

stress-ng (0.06.04-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile: remove gcc coverage build flags
    - these were accidentally added in the previous release and not
      removed

 -- Colin King <colin.king@canonical.com>  Wed, 18 May 2016 19:16:45 +0100

stress-ng (0.06.03-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-cap: cap data needs _LINUX_CAPABILITY_U32S_3 elements in size
  * stress-nice: add some randomness to the delay to unsync nicenesses
  * stress-opcode: remove white spaces

 -- Colin King <colin.king@canonical.com>  Wed, 18 May 2016 15:06:34 +0100

stress-ng (0.06.02-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile + stress-vecmath: add more smarts to detect gcc build failures
  * stress-af-alg: don't fatally fail on bind on AF_ALG
  * stress-af-alg: fix up error messages
  * Add stackmmap stressor
  * stress-stack: ensure signal handling stack is aligned
  * stress-context: ensure stack is aligned to 64 byte boundaries
  * stress-opcode: disable signal count tracking
  * stress-opcode: clean up code a little
  * Add opcode stressor
  * update syscalls.txt
  * stress-ioprio: perform some io writes to exercise i/o priorities
  * Add ioprio stressor

 -- Colin King <colin.king@canonical.com>  Sun, 15 May 2016 17:36:11 +0100

stress-ng (0.06.01-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-af-alg: avoid any unterminated strings (unlikely)
  * debian/control: add libcap-dev to Build-Depends
  * stress-hdd: should use SIZEOF_ARRAY instead of sizeof
  * stress-full: don't close fd before trying a read
  * stress-af-alg: ensure the rng read size is correct
  * stress-af-alg: fix more -ve fd closes
  * stress-af-alg: don't close fd that is -ve
  * stress-tlb-shootdown: fix incorrect comparison on ENOMEM
  * stress-af-alg: check for errors on setsockopt
  * stress-full: try read test rather than skip if write fails
  * stress-full: clear buffer before we write

 -- Colin King <colin.king@canonical.com>  Fri, 6 May 2016 22:58:01 +0100

stress-ng (0.06.00-1) unstable; urgency=medium

  * Makefile: new major version and codename
  * stress-msync: cast off_t to intmax_t to print with %jd format specifier
  * debian/control: update Standards Version to 3.9.8
  * manual: update date
  * stress-msync: add in conditional STRESS_MSYNC build check
  * stress-af-alg: add simple rng to the mix
  * stress-af-alg: remove redundant type field info
  * manual: rephrase the --seq description
  * manual: clean up the SEE ALSO section
  * Add TLB shootdown stressor
  * stress-af-alg: remove (void)name
  * Add /dev/full stressor
  * stress-urandom: where possible also read data from /dev/random
  * Manual: update af-alg skciper section.
  * stress-hdd: work through all the --hdd-opts if --maximize is enabled
  * stress-xattr: fix error messages, they were reporting wrong syscall
  * stress-af-alg: use array size so we don't need NULL sentinels
  * stress-af-alg: Add skcipher stessing
  * stress-procfs: add /proc/tty, /proc/self, /proc/thread_self
  * stress-key: Add some more keyctl calls
  * Rename stressor names to match their command line name
  * Add msync stressor
  * Fix non-Linux build for set_cpu_affinity
  * stress-rtc: also read /proc/driver/rtc
  * Add RTC stressor
  * stress-get: use prlimit only with glibc >= 2.13.0
  * stress-procfs: add more /proc directory traversal
  * stress-inotify: add ioctl FIONREAD to peek at available data on fd
  * Add the CPU affinity option '--taskset'
  * stress-cache: make pinned a linux only variable
  * stress-cache: fix pinned message, swap cpu and instance around
  * stress-cache: fix failure to build on GNU/HURD
  * Update contributions authors in manual
  * Ensure processes are kept to the CPU affinity set
  * taskset -c 4-7 stress-ng --cache 4 --stream 4 --yield 4
  * Update README with other OS build notes
  * stress-spawn: make this a Linux only test
  * Disable MLOCKED sections for now on SunOS, we get linker issues
  * stress-ng: correct casts of void *
  * stress-ng: include alloca.h for SunOS
  * stress-ng: cater for systems that don't support RLIMIT_NPROC
  * mincore: cater for SunOS mincore API difference
  * stress-yield: correct casts of void *
  * stress-yield: include alloca.h for SunOS
  * stress-vm: correct casts of void *
  * stress-stream: correct casts of void *
  * stress-str: include strings.h for SunOS builds for index() prototype
  * stress-stack: include alloca.h for SunOS
  * stress-sigsuspend: correct casts of void * and uint64_t *
  * stress-mmapmany: correct casts of void * and uint8_t *
  * stress-mmap: correct casts of void * and uint8_t *
  * Fix alignment mask to ensure stacks are 16 byte aligned (LP: #1573117)
  * stress-mlock: correct casts of void * and uint8_t *
  * stress-icache: cast addr to (void *) in mprotect calls
  * mounts: SunOS requires *BSD style build arrangements
  * stress-hdd: cast data to (void *) to silence warning
  * stress-hdd: don't use futimes for Solaris UNIX
  * Add logging to syslog of free memory info post-OOM
  * Add system and memory syslog logging
  * stress-brk: catch EAGAIN errors on sbrk/brk
  * Remove debug log test message
  * stress-socket-fd: only build stressor if STRESS_SOCK_FD defined
  * Add logging of who and how stress-ng was invoked to syslog

 -- Colin King <colin.king@canonical.com>  Wed, 4 May 2016 09:57:59 +0100

stress-ng (0.05.25-1) unstable; urgency=medium

  * Makefile: bump version
  * debian/control: update standards version to 3.9.7
  * Ensure all clone() calls are 16 byte aligned for aarch64 (LP: #1573117)

 -- Colin King <colin.king@canonical.com>  Fri, 22 Apr 2016 09:50:44 +0100

stress-ng (0.05.24-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-mmap: handle SIGBUS signals (LP: #1569468)
  * stress-mmapmany: sanity check sysconf return
  * stress-mmapmany: detect SEGV deaths
  * stress-mlock: detect SEGV deaths
  * stress-brk: detect SEGV deaths
  * stress-bigheap: detect SEGV deaths
  * stress-memfd: detect SEGV deaths
  * stress-mmapmany: allocate mappings on heap rather than stack
  * stress-mlock: allocate mappings on heap rather than stack
  * stress-cpu: move sieve buffer to static to reduce stack size
  * stress-sem*: differentiate between which semaphore init that failed
  * stress-remap-file-pages: abort if remap fails
  * stress-fiemap: remove \n from pr_fail_err messages

 -- Colin King <colin.king@canonical.com>  Thu, 14 Apr 2016 11:00:11 +0100

stress-ng (0.05.23-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-aio: fix segfault on --maximumize option (LP: #1568335)
  * stress-chmod: just instance 0 should create the file (LP: #1568333)

 -- Colin King <colin.king@canonical.com>  Sat, 9 Apr 2016 17:48:23 +0100

stress-ng (0.05.22-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-af-alg: retry open if we get EAFNOSUPPORT (LP: #1564786)

 -- Colin King <colin.king@canonical.com>  Fri, 1 Apr 2016 09:40:56 +0100

stress-ng (0.05.21-1) unstable; urgency=medium

  * Makefile: bump version
  * Add test-cap.c to Makefile dist rule
  * debian: tests: don't run remap stressor
  * stress-ng: add klog (syslog) stressor
  * syscalls: add remap_file_pages
  * Add page remapping stressor
  * stress-pthread: Add get_robust_list call
  * stress-sysinfo: exercise fstatfs()
  * Move wcs options to correct postion in manual
  * Add the sync-file stressor
  * Add fp-error stressor
  * syscalls.txt: update some missing syscalls and some re-ordering
  * Add sys/capability.h and capget build time checks
  * stress-get: add prlimit
  * Update syscalls.txt with capget stressor
  * Add capabilities stressor

 -- Colin King <colin.king@canonical.com>  Sun, 20 Mar 2016 11:39:31 +0000

stress-ng (0.05.20-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-getdent: fix build warnings on systems with no getdents syscalls
  * Manual: update date
  * Debian/changelog: fix spelling mistake
  * stress-udp: fix two warnings on uninitialised addr
  * stress-socket-fd: fix two scan-build warnings
  * stress-getdent: init ret to -ENOSYS, fix scan-build warning
  * Use the generic signal handler helpers
  * helper: add generic signal handling/restoring helper functions
  * stress-oom-pipe: use stress_get_file_limit
  * stress-open: use stress_get_file_limit
  * stress-dup: use stress_get_file_limit
  * stress-socket-fd: use stress_get_file_limit
  * helper: add stress_get_file_limit to get max open files allowed
  * Add sockfd stressor
  * Add getdent stressor
  * stress-filename: use strncpy rather than strcpy
  * stress-qsort: use calloc
  * stress-cpu: zeta method should be counting in integers
  * stress-mergesort: use calloc
  * stress-heapsort: use calloc
  * stress-bsearch: use calloc

 -- Colin King <colin.king@canonical.com>  Sat, 12 Mar 2016 17:58:42 +0000

stress-ng (0.05.19-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-switch: don't initialize buf_size twice
  * stress-ng: don't stress-sleep options unless STRESS_SLEEP defined
  * stress-shm-sysv: comparing j < i - 1 is incorrect when i = 0
  * stress-shm-sysv: parent should close read end of pipe
  * stress-context: make stacks larger, avoid segfault on kFreeBSD
  * stress-oom-pipe: handle condition where pipe size can't be set
  * stress-pipe: use O_DIRECT when possible
  * stress-switch: use O_DIRECT with 1 byte buffer is possible
  * stress-oom-pipe: ensure sz is set before we check it against prev_sz
  * Add stress-oom-pipe pipe buffer stressor
  * helper: fix comment on system_read()
  * stress-fallocate: add in default mode 0
  * stress-iosync: fix build warning when using old glibc:
  * stress-fstat: add blacklist of paths not to open/fstat/close
  * correctly spell stress_adjust_pthread_max
  * stress-str: make some statics into static const
  * stress-socket: make socket_opts static const
  * stress-maxtrix: make some statics static const
  * stress-vm: make some statics static const
  * stress-wcstr: make variables static const
  * stress-get: make priorities static const
  * stress-filename: make filename_opts static const
  * stress-dentry: make dentry_removals static const
  * stress-cpu: make some variables static const
  * stress-clone: make flags and unshare flags static const
  * stress-chmod: make modes static const
  * perf: make perf_tp_info static const
  * cache: make struct generic_map const
  * helper: make stress_temp_path static const
  * stress-udp-flood: make data static const
  * stress-spawn: make exec strings static
  * Only define OPT_PTHREAD* macros if STRESS_PHREAD is defined
  * Minor #define changes, no functional change
  * stress-cpu: remove redundant initialisation of last_e
  * stress-cpu: don't build _Decimal stressors with clang
  * stress-shm-sysv: set entire shm_ids array to -1
  * stress-fork: make child exit immediately and stash pid only in parent
  * stress-xattr: free buffer on error exit path
  * stress-timerfd: fix timer thresholding check
  * Add sleep stressor
  * stress-clock: add some comments and make source 80 column friendly
  * bigheap: reorder some variables on the stack for better packing
  * Add whitespace in return statement
  * thermal-zone: minor clean up
  * net: make loop iterator size_t
  * cache: minor code tweaks, no functional changes
  * cache: rework get_contents error return paths
  * cache: reformat function declarations to match the stress-ng code style
  * clean up and rename macro mk_path to MK_PATH
  * Ensure we do not under run string buffer
  * Add apparmor_parser executable check
  * time: make source 80 column friendly
  * thermal-zone: make source 80 column friendly
  * sched: make source 80 column friendly
  * perf: make source 80 column friendly
  * mlock: make source 80 column friendly
  * limit.c: remove redundant #includes
  * io-priority: make source 80 column friendly
  * ignite-cpu: make source 80 column friendly
  * Include stress-ng.h first for __kernel_long_t and __kernel_ulong_t

 -- Colin King <colin.king@canonical.com>  Thu, 3 Mar 2016 17:20:01 +0000

stress-ng (0.05.18-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-eventfd: fix incorrect return check on eventfd (LP: #1547450)
  * stress-mknod: fix == comparison on errno (LP: #1547446)
  * stress-tee: catch EINTR in splice() calls (LP: #1547434)

 -- Colin King <colin.king@canonical.com>  Fri, 19 Feb 2016 12:40:24 +0000

stress-ng (0.05.17-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-aio: don't cancel the signal handler before exiting (LP: #1547108)
  * stress-lockf: don't return failure if we get a timeout (LP: #154107)
  * stress-aio: don't return failure if we get a timeout (LP: #1547090)
  * Check for ENOMEM ENOSPC errors during init (LP: #1547062)
  * make stress_temp_dir_mk and stress_temp_dir_rm return -errno on failure
  * stress-dentry: fix file striding on clean-up (LP: #1547004)
  * Add stress_get_prime64 to stress-ng header
  * Add stress_get_prime64 to find a prime for filename striding
  * typedef possibly missing __kernel_long_t and __kernel_ulong_t
  * Add <linux/posix_types.h> for linux builds
  * stress-aio-linux: fix clang scan-build warning
  * Makefile: only do build time config detection when building target

 -- Colin King <colin.king@canonical.com>  Thu, 18 Feb 2016 17:52:11 +0000

stress-ng (0.05.16-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile: add test-libaio.c to dist rule
  * stress-seccomp: EINTR on waitpid is not a failure, so ignore it
  * stress-numa: aborted test should not be a failure, nothing got tested
  * stress-quota: check for EPERM, abort if we don't have permission
  * stress-kcmp: check for EPERM, abort if we don't have permission
  * debian/control: add libaio-dev dependency
  * stress-aio: use aiolib instead of direct system calls
  * Catch faults in child stressor and flag them as a fatal failure
  * stress-socket: only build in sendmmsg test for glibc 2.14 or higher
  * stress-iosync: build in syncfs call for glibc 2.14 or higher
  * Add detection for <linux/seccomp.h>
  * stress-handle: only build in if we have glibc 2.14 or higher
  * ignite-cpu: don't print failure message as inf, make it dbg
  * stress-malloc: calloc'd size is too big, fix the size (LP: #1544575)
  * mincore: page align address of buffer before passing it to mincore

 -- Colin King <colin.king@canonical.com>  Fri, 12 Feb 2016 19:02:59 +0000

stress-ng (0.05.15-1) unstable; urgency=medium

  * Makefile: bump version
  * fast-test-all: add pass/fail summary at end
  * fast-test-all: fix typo, socket-pair should be sockpair
  * stress-handle: specify width of integer in sscanf
  * Manual: expand the error exit code notes
  * stress-qsort: cast data to (uint8_t *) to stop static analysis warnings
  * stress-hdd: close file on a fstat failure
  * stress-futex: add backoff delay if futex is too much in contention
  * stress-sendfile: ignore EINTR on sendfile calls
  * stress-readahead: handle -ENOSPC as a non-failure condition
  * stress-vm-rw: re-organise the code into parent/child helpers
  * stress-userfaultfd: set stack size to be STACK_SIZE
  * stress-hdd: handle -ENOSPC as a non-failure condition
  * adt: remove socket-pair from tests
  * cache helper: output cache allocation size
  * stress-cpu-online: only report root requirement on instance 0
  * stress-cpu-online: Don't report a failure if not run as root
  * Add L before cache level to make the debug less abstract
  * stress-denty: ENOSPC should not be a fatal error that stops the test
  * Fix -x option, compare munged strings to treat '_' like '-'
  * Ensure pathological class is disabled if we don't enable --pathological
  * stress-zlib: fix comparison which should not be an assignment
  * helper: fix double free on error exit

 -- Colin King <colin.king@canonical.com>  Wed, 10 Feb 2016 10:35:16 +0000

stress-ng (0.05.14-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix make dist - typo in test-libpthread.c
  * stress-fiemap: initialise counter at start of loop
  * stress-fiemap: ensure counter is being updated
  * adt: exclude bind mount from list of stressors
  * Don't emit warning on --pathological if number of stressors is zero
  * ignite-cpu: add null entry at end of list, don't scan by array size
  * Only include <sys/mount.h> for linux for the bind mount stressor
  * stress-bind-mount: build stressor if STRESS_BIND_MOUNT defined
  * stress-bind-mount: stop cppcheck whining about uninitialised pid
  * stress-numa: don't fatally fail on -EIO with MPOL_MF_STRICT (LP: #1542741)
  * Enabled IGNITE_CPU with the --aggressive option
  * Add bind-mount stressor (LP: #1542010)
  * Add --ignite-cpu option to maximize CPU frequency
  * Make float decimal auto detect set -DHAVE_FLOAT_DECIMAL
  * Minor re-org of Makefile, and add more files to dist rule
  * Update README - increase number of stressors
  * adt tests: remove membarrier, it fails on older kernels in Debian
  * Add some more comments
  * stress-affinity: handle EINVAL when CPU(s) are offline
  * Set number of instances to on-line CPUs if N is -ve (LP: #1513546)
  * Remove opt_long, replace with get_int32 or get_uint64
  * Add libpthread build time checks
  * Add librt build time checks
  * Remove commented out old link line
  * Add libcrypt check
  * Makefile: remove test-libz correctly
  * stress-cpu: make source 80 column friendly
  * Add FORCE_DO_NOTHING macro do force compiler to stop opimizing out loops
  * Add zlib stressor
  * stress-stream: cater for systems without L3 cache
  * stress-stream: only emit cache size info on instance 0
  * Add libbsd-dev to README

 -- Colin King <colin.king@canonical.com>  Mon, 8 Feb 2016 18:29:11 +0000

stress-ng (0.05.13-1) unstable; urgency=medium

  * Makefile bump version
  * Makefile: add test-libbsd.c to dist rule
  * adt: Bar a few more tests that can be problematic on different arches
  * stress-fifo: don't return and error status if we have to abort early
  * Exclude tests that may fail because system calls not fully implemented
  * Build stress-mergesort if STRESS_MERGESORT is defined
  * Built stress-heapsort if STRESS_HEAPSORT is defined
  * Make *put globals volatile to force gcc to compute values
  * Add BSD mergesort stressor
  * Add BSD heapsort stressor
  * madvise: add MADV_FREE
  * stress-vm-rw: don't close already closed pipe ends
  * stress-vm: just one top level iteration in rowhammer method
  * Use MAP_SHARED where appropriate
  * stress-qsort: fix typo in comment SIGARLM -> SIGALRM
  * Makefile: call make using $(MAKE)
  * stress-apparmor: reduce scope of ret
  * stress-shm: reduce the scope of variable n
  * stress-shm-sysc: reduce scope of variable n

 -- Colin King <colin.king@canonical.com>  Thu, 4 Feb 2016 16:02:00 +0000

stress-ng (0.05.12-1) unstable; urgency=medium

  * Makefile: bump version
  * cache: memset globbuf, work around clang warnings
  * stress-cpu-online: free cpu_online on error return
  * fast-test-all: use the -v verbose flag
  * fast-test-all: Don't yet test copy-file
  * stress-copy-file: only build if syscall is supported
  * Change type of error messages in cache helper
  * cache: use %zd format specifier for size_t
  * cache: make source 80 column friendly
  * fast-test-all: return with error exit status
  * Tweak man page exit status table
  * Exit with status 2 if a stressor failured
  * Change mini help text to make it consistent
  * Add cpu-online to mini help
  * stress-cache: cater for non-powers of 2 cache size
  * Remove hard #undef __linux__ used during debugging
  * Re-work shared cache buffer allocation
  * stress-memcpy: fix segfault due to changes in allocation of cache buffer
  * Add kcmp to exclude list on adt test
  * Add cpu-online to exclude list on adt test
  * Make some helpers return int32_t rather than long
  * Add WARN_UNUSED macro and use it against functions that need return checks
  * Add CPU online stressor
  * Fix indentation issue after --hdd

 -- Colin King <colin.king@canonical.com>  Thu, 28 Jan 2016 12:30:47 +0000

stress-ng (0.05.11-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-stream: make L3 a uint64_t
  * stress-clock: fix build warning on non-Linux systems
  * stress-stream: fix FTBFS on non-Linux systems

 -- Colin King <colin.king@canonical.com>  Tue, 26 Jan 2016 20:50:11 +0000

stress-ng (0.05.10-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-stream: use new cache probing api
  * Add James Hunt to contributors in man page
  * cache: constify a few args and (void) fclose returns
  * Makefile: re-order cache.c in source list
  * stress-cache: make source 80 col friendly, use name instead of __func__
  * Removed bogus check.
  * Reduce cache level to maximum available if specified too high.
  * New function to check max cache level. Also, reduced variable scope.
  * Merge branch 'master' into cache-handling
  * Rather than failing, display a message and fall back to defaults.
  * Reduce variable scope and remove redundant assignment.
  * stress-copy-file: off_t should be loff_t
  * Remove debug forced enabled of stress-file-copy
  * Merge branch 'master' into cache-handling
  * Add --cache-level=, --cache-ways=, and --cache-no-affinity to man page.
  * Add linux guard for cpu cache function prototypes.
  * Handle systems not providing cache details via sysfs
  * Dispense with cache.h.
  * get_contents(): Fixed resource leak.
  * Add --copy-file copy_file_range() stress test
  * Fix spelling mistake of "bandwidth"
  * Fix spelling mistake of "weird" in comment
  * man page: Fix formatting on vm stressor method table
  * Fixes for building on non-Linux platforms.
  * Add Linux support to specify cache type and size.
  * Fix column width of vm-method options
  * Fix column width of stream option description

 -- Colin King <colin.king@canonical.com>  Tue, 26 Jan 2016 16:44:00 +0000

stress-ng (0.05.09-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix incorrect position of \ in man page
  * stress-udp: fix UDP-Lite enable options
  * stress-af-alg: don't build for non-Linux systems
  * stress-udp: add error checking to setsockopt calls
  * Add auto detection of xattr.h to avoid build failures
  * Add auto detection of keyutils.h to avoid build failures
  * stress-numa: prefix abort message with stressor name
  * stress-udp: in UDP-Lite mode, limit checksum to 8 byte UDP header
  * Fix formatting of --hdd-opts in man page
  * Add --seek-punch option to punch holes in seek file
  * Add UDP-Lite option --udp-lite
  * Align bitfields in flags
  * stress-socketpair: handle ENFILE errors more gracefully
  * stress-filename: only emit filename information on instance 0
  * Add fiemap stressor
  * stress-stream: kludge around a false positive from static analysis
  * Add --stream-l3-size option to specify stream L3 CPU cache size
  * stress-unshare: don't complain on -EINVAL
  * stress-stream: remove extraneous space between cache size and K
  * Use RESTRICT macro as an alias for __restict
  * Add stream memory bandwidth and computation stressor
  * Add 8 more bits to OPT_FLAGS
  * stress-aio: remove unused typedef
  * refactor random string filling using stress_strnrnd()
  * Add AF_ALG socket domain (hash) tester
  * Add more tracing perf events to --perf output

 -- Colin King <colin.king@canonical.com>  Mon, 18 Jan 2016 11:07:02 +0000

stress-ng (0.05.08-1) unstable; urgency=medium

  * Makefile: bump version
  * Remove stress-leak.c, it was accidentally added
  * Update man page date
  * Debian control: Use dh_apparmor
  * Fix incorrectly placed #endif around TSEARCH
  * stress-iosync: (void)name if not building for Linux
  * stress-mlock: remove debug message
  * Add in options to *search stressors in mini built-in help
  * Add TSC read stressor
  * Remove some redundant (void)var statements
  * stress-get: rename gettid to sys_gettid to avoid name clash
  * Move uint64_put and double_put from helper.c to stress-ng.h
  * Rename macros STRESS_{MIN|MAX} -> STRESS_{MINIMUM|MAXIMUM}
  * Update debian copyright to 2016
  * Update copyright year to 2016
  * stress-iosync: don't close -ve fd

 -- Colin King <colin.king@canonical.com>  Wed, 6 Jan 2016 15:22:12 +0000

stress-ng (0.05.07-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-yield: include signal.h to build on FreeBSD
  * Exclude stressors that cannot be run
  * stress-matrix: add copy and mean methods
  * stress-yield: ensure at least 2 child processes per CPU
  * Update syscalls.txt with syncfs
  * stress-key: remove if def'd debug code
  * stress-iosync: add syncfs() for Linux only
  * Add --sock-nodelay option to disable the Nagle algorithm
  * stress-socket: split out client/server code into separate functions
  * stress-exec: remove (void)name;
  * stress-dentry: add 'random' ordering option
  * stress-affinity: set initial cpu to instance number
  * stress-clock: output name of clock timer id on error
  * Add --temp-path option
  * Debian/control: change priority because of apparmor dependency
  * Add apparmor to excluded adt tests
  * Add sendmsg and sendmmsg to syscalls.txt
  * Add --sock-opts option

 -- Colin King <colin.king@canonical.com>  Sat, 26 Dec 2015 17:34:00 +0000

stress-ng (0.05.06-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile + stress-apparmor: generate binary data using od and sed

 -- Colin King <colin.king@canonical.com>  Thu, 24 Dec 2015 00:10:00 +0000

stress-ng (0.05.05-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile: --no-print-directory is required when make calls itself
  * Add apparmor as a build dependency
  * Makefile: Add test-apparmor.c usr.bin.pulseaudio.eg to make dist dist
  * stress-seccomp: stop build warnings on systems without seccomp
  * Ensure test-appormor build test covers the aa API
  * Remove mwc_seed from mwc.c
  * Add load average stats to --times option
  * inline mwc_seed, faster and shrinks text size a bit
  * stress-apparmor: perform some more devious corruption actions
  * Debian: control: dependency should be libapparmor-dev
  * stress-spawn: move spawn_calls to correct accounting stats
  * Add a posix-spawn stressor
  * Add unshare stressor
  * stress-shm-sysv: ensure all shm_ids are initialised to -1
  * Update Makefile to autogenerate AppArmor binary blob
  * stress-apparmor: add some random bit corruption
  * stress-apparmor: add profile add/replace/remove stressing
  * Debian: control: add libapparmor1 dependency
  * stress-apparmor: #if def global vars
  * README: Add note about requiring GNU make
  * Add initial simple AppArmor test, more features later

 -- Colin King <colin.king@canonical.com>  Wed, 23 Dec 2015 13:58:00 +0000

stress-ng (0.05.04-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-userfaultfd: fix 32 bit build warning
  * stress-shm: replace strides of 4096 with page size
  * stress-shm-sysv: replace strides of 4096 with page size
  * stress-mremap: replace strides of 4096 with page size
  * stress-mmap: replace strides of 4096 with page size
  * stress-bigheap: make stride the page size
  * parse-opts: ensure_positive: don't reassign ptr twice
  * stress-daemon: close dup'd fds on exit
  * Add daemon stressor
  * Move set_proc_name into helper, remove proc-name.c
  * helper: make timer slack also depend on __linux__
  * stress_mlock_region: constify args
  * stress_get_stack_direction: constify arg
  * Remove coredump, merge functionality into helper
  * Update README
  * syscalls: add mlock2
  * stress-mlock: add support for mlock2
  * stress-aio: clear io_reqs before use and disable handler later
  * stress-rename: rename between directories

 -- Colin King <colin.king@canonical.com>  Mon, 14 Dec 2015 16:10:00 +0000

stress-ng (0.05.03-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-seccomp: avoid build failures on arm64 targets

 -- Colin King <colin.king@canonical.com>  Sat, 5 Dec 2015 10:04:23 +0000

stress-ng (0.05.02-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-get: define _DEFAULT_SOURCE to stop gcc 5.2.1 warnings
  * Add new seccomp stressor
  * stress-mmap: fix thinko, init no_mem_retires in correct place
  * stress-shm-sysv: add more allocation smarts
  * stress-shm-sysv: add mmap failure abort and OOM counting
  * stress-shm: add mmap failure abort and OOM counting
  * stress-seek: set a useable upper seek limit for 32 bit arches
  * stress-mmap: add mmap retry mechanism if we can't mmap memory
  * stress-memfd: trap SIGBUS as well as SIGKILL for OOM catching
  * stress-vm: add spacing on OOM restarts message
  * stress-malloc: add spacing on OOM restarts message
  * stress-memfd: add spacing on OOM restarts message
  * stress-vm: add mmap retry mechanism if we can't mmap memory
  * refactor stack direction checking function
  * stress-personality: fix warning on %lu being used on a size_t
  * stress-ptrace: re-enable this stressor and fix up pr_failed_* macro
  * Enable personality stressor

 -- Colin King <colin.king@canonical.com>  Fri, 4 Dec 2015 12:49:02 +0000

stress-ng (0.05.01-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-shm: break out of loops when ok is false
  * stress-fcntl: make F_SETOWN and F_GETOWN linux only for now
  * helper: fix warning on FreeBSD, unused args caused warnings
  * stress-switch: force more context switches
  * stress-pipe: add pipe-data-size and pipe-size options
  * stress-seek: only report error if SEEK_DATA/SEEK_HOLE supported
  * stress-seek: add SEEK_DATA and SEEK_HOLE seeks
  * syscalls.txt: add new userfaultfd syscall
  * Manual: note that userfaultfd is only for Linux
  * Add new userfaultfd stressor
  * stress-membarrier: rename pr_failed_err -> pr_fail_err
  * stress-cpu: force more jmps in cpu-jmp method
  * stress-brk: add occasional brk shrink to add a bit more variety
  * stress-shm-sysv: use some more random shm flags
  * stress-mmap: use some more random mmap flags
  * stress-fallocate: add some more fallocate modes
  * Rename pr_failed_* macros to pr_fail
  * log: rename logging functions
  * log: don't be silent when we have failure messages
  * stress-filename: Add more error handling feedback
  * Update debian/rules: enable debian build flags
  * Fix buffer not null terminated error with strncpy
  * Add filename stressor
  * Add --timer-slack option to adjust timer slackness
  * disable core dump via prctl() to avoid massive core files
  * Signal to child processes if parent has died.
  * log: make variables static

 -- Colin King <colin.king@canonical.com>  Mon, 30 Nov 2015 10:55:00 +0000

stress-ng (0.05.00-1) unstable; urgency=medium

  * Makefile: bump version to 0.05.00, update codename
  * man page: fix wrapped line so 'lsearch' is not seen as a macro
  * shm stressors: make final write failures a debug message
  * shm stressors: exit child stressor if pipe write fails
  * Add POSIX shared memory stressor
  * stress-qsort: fix resource leak on error return path
  * man page: make it 80 column tty friendly
  * stress-qsort: bail out when SIGALRM triggers
  * stress-rlimit: disable handlers once we finish to avoid setjmp looping
  * log: remove debug cruft
  * Add --log-file logging option
  * stress-sem*: remove ; after while loop
  * stress-icache: force cache clear using __clear_cache
  * Make source more 80 column friendly
  * manual: clarify number of cpus
  * madvise: fix typo
  * stress-shm-sysv: make shm cleanup robust
  * stress-ng: remove setpgrp() calls
  * stress-sem-sysv: handle signal during setup phase correctly
  * stress-sem: handle signal during setup phase correctly
  * fix -k option: it does not require a parameter
  * stress-procfs: use non-blocking open

 -- Colin King <colin.king@canonical.com>  Wed, 18 Nov 2015 23:05:00 +0600

stress-ng (0.04.21-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix man page --handle options, errors found by lintian
  * Makefile: add personality.c to dist rule
  * Add dep8 tests
  * Add membarrier to syscalls.txt
  * Fix spelling mistake in membarrier error message
  * Add membarrier stressor
  * stress-sysfs: make sysfs reader more stressful
  * stress-procfs: make proc fs reader more stressful
  * Makefile: remove -g option
  * Add new lockbus cache line stressor
  * stress-get: add adjtime() call
  * Add utimes(2) call to stress-utime
  * stress-mq: also exercise mq_timedreceive
  * stress-key: don't abort on EDQUOT for a KEYCTL_UPDATE
  * Update syscalls.txt
  * Manual: update contributor list
  * stress-cpu: check complex supported by C lib (LP: #1500349)
  * Add handle stressor
  * stress-socket: add nagle disable build option
  * Move ionice options in manual to general settings section
  * Move --syslog option in manual to general settings section
  * Add stress-personality personality() stressor
  * Add mknod stressor
  * Add stress-exec execve stressor
  * stress-sysfs: add access() check on file

 -- Colin King <colin.king@canonical.com>  Mon, 2 Nov 2015 17:03:00 +0600

stress-ng (0.04.20-1) unstable; urgency=medium

  * Makefile: bump version
  * cater for system V and BSD variants of setpgrp
  * stress-fifo: avoid blocking on reader to avoid deadlock (LP: #1497268)
  * stress-readahead: give feedback on premature exit
  * stress-aio: no need to free io_reqs, its now on the stack
  * Put all child processes under the parents process group ID (LP: #1497236)
  * Remove SIGUSR1 and SIGUSR2 trapping, we don't need to trap these
  * stress-fifo: check for run flag in child loop
  * stress-eventfd: check for run flag in child loop
  * stress-epoll: check for run flag on recv loop
  * stress-mq: check for run flag in child loop
  * stress-msg: check for run flag in child loop
  * stress-pipe: check for run flag in child loop
  * stress-sigfd: check for run flag in child loop
  * stress-socket: check for run flag in child loop
  * stress-switch: check for run flag in child loop
  * stress-tee: check for run flag in child loop
  * stress-vm-rw: check for run flag in child loop
  * stress-sigq: check for run flag in child loop
  * stress-kcmp: check for run flag in child loop
  * stress_sigsuspend: check for run flag in child loop
  * stress-socket-pair: check for run flag rather in child loop
  * stress-pipe: bail out on zero byte pipe reads (LP: #1496966)
  * stress-futex: bail out after 0.5 seconds of failed waits (LP: #1496963)
  * stress-clone: remove CLONE_VM unsharing (LP: #1496957)
  * stress-sigsuspend: remove spinlock to remove contention (LP: #1496439)
  * Put stack in per clone struct, reduce stack size
  * stress-aio: cancel signal handler at end of test (LP: #1496340)

 -- Colin King <colin.king@canonical.com>  Fri, 18 Sep 2015 15:38:00 +0100

stress-ng (0.04.19-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-cpu: data and idct should be floats for idct (LP: #1495882)
  * stress-cpu: use hex initialisers for G constants instead of binary
  * stress-numa: fix out of bounds memory read on ARM64 (LP: #1495761)

 -- Colin King <colin.king@canonical.com>  Tue, 15 Sep 2015 10:43:11 +0100

stress-ng (0.04.18-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix singular/plural of "stressors spawned" message (LP: #1494797)
  * stress-ureadahead: provide feed back when timout occurs (LP: #1494784)
  * stress-timer, itimer: fix termination hangs (LP: #1494751)

 -- Colin King <colin.king@canonical.com>  Fri, 11 Sep 2015 16:24:42 +0100

stress-ng (0.04.17-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-fstat: open devices with O_NONBLOCK (LP: #1493717)
  * stress-epoll: ensure addr is initialised to NULL
  * stress-vm: Add sanity check for rowhammer sizes
  * stress-timer: fix incorrect setting of timer
  * stress-itimer: fix incorrect setting of timer
  * stress-shm-sysv: remove dead initialisation of sz
  * stress-hsearch: remove dead initialisation of max
  * thermal-zone: remove dead initialisation
  * stress-epoll: remove redundant retries assignment
  * stress-socket: remove redundant retries assignment

 -- Colin King <colin.king@canonical.com>  Wed, 9 Sep 2015 09:08:00 +0100

stress-ng (0.04.16-1) unstable; urgency=medium

  * Makefile: bump version
  * Don't build in stress-clone features if clone() not available
  * stress-clone: add unshare call
  * stress-get: add timex info get
  * Update syscalls.txt with clone
  * Add clone stressor
  * Add the 8-queens solver to the CPU stressor
  * stress-key: add build checks on KEYCTL_* features

 -- Colin King <colin.king@canonical.com>  Mon, 7 Sep 2015 10:03:00 +0100

stress-ng (0.04.15-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix --vm-keep, it should be setting opt_flags
  * Update man page contributions

 -- Colin King <colin.king@canonical.com>  Mon, 17 Aug 2015 08:41:00 -0700

stress-ng (0.04.14-1) unstable; urgency=medium

  * Makefile: bump version
  * Debian: control: don't depend on libkeyutils-dev for some arches
  * Don't parse NULL exclude list

 -- Colin King <colin.king@canonical.com>  Thu, 30 Jul 2015 12:48:00 +0100

stress-ng (0.04.13-1) unstable; urgency=medium

  * Makefile: bump version, change code name
  * Move exclude parsing after we have parsed all the stressor options
  * stress-ng: fix unitialised n, found by clang
  * stress-key: handle clean up when we bail out early
  * stress-stack should not be part of the CPU stress class
  * Add the -x, --exclude test exclusion option
  * Add libkeyutils-dev to debian control
  * Update syscalls list
  * Add key stressor (keyctl, add_key)
  * stress-kcmp: bail out early after 5 kcmp test failures per instance
  * Remove some trailing white spaces from lines
  * stress-vm: replace logic with simplified version
  * stress-vm: parenthesis around macro definition
  * stress-rdrand: add more useful debug stats
  * Add instruction cache stressor
  * helper: fix spelling mistake
  * Manual: fix a few spelling mistakes
  * stress-str: make index a register size_t type
  * stress-wdstr: make index a register size_t type
  * stress-wait: tidy up formatting of function args
  * stress-mmapmany: use STRESS_MAX macro
  * stress-mmapfork: minor variable cleanup
  * stress-inotify: make mk_filename static
  * stress-matrix: replace #defined MATRIX_TYPE with typedef
  * coredump: make string static
  * mounts: make mount_add static, clean up code a bit
  * Put MIN/MAX macros into stress-ng.h
  * Small amount of white space empty line clean up
  * Unify SET/GET/CLR macros
  * stress-futex: move futex info into futex struct
  * stress-sem-sysv: move sem sysv info into sem_sysv struct
  * stress-sem-posix: move sem and init into sem_posix struct
  * stress-xattr: add flistxattr calls
  * Minor change to error message
  * Fix typo in man page, exerised -> exercised
  * stress-mq: use correct stressor name in dbg messages
  * stress-mq: add occasional use of mq_getattr()
  * Only call perf_* if --perf is actually being used
  * yaml: times and system-info are not arrays, but lists
  * Add perf tracepoint events
  * coredump: pid_t should be %u rather than %d, pids are not -ve
  * stress-mlock: avoid using void * ptr arithmetic
  * helper: fix signum comparisons, use && instead of ||
  * stress-cache: don't keep fetching number of cpus available
  * stress-affinity: don't keep fetching number of cpus available
  * Make u_time, s_time, t_time, u_pc, s_pc, t_pc doubles
  * thermal-zone: cast to double rather than float
  * stress-cpu: ensure we don't get double promotion issues
  * minor adjustment to whitespace/tab indentation
  * perf: fix spelling mistake: Aligment -> Alignment
  * stress-cpu: add C union bit field stressor
  * Really ensure we don't report perf counters if they are not available
  * stress-sigfd.c: Fix compile warning
  * stress-sigfd: user SIGRTMIN instead of SIGUSR1
  * coredump: remove redundant code
  * stress-mlock: clarify cast to void, ensure we are not doing void * math
  * stress-socketpair: reduce the scope of variable ret
  * stress-rlimit: reduce scope of variable ret
  * stress-fcntl: put each fcntl cmd into its own block
  * stress-brk: reduce scope of ptr
  * stress-cpu: reduce scope of loop variable
  * Add more system info to yaml output to help with test result gathering
  * stress-getrandom: cater for builds without the syscall defined
  * stress-aio-linux: clean up syscalls
  * Clean up memfd syscall wrapper
  * perf: call perf_event_open via a wrapper rather than direct syscall
  * stress-getrandom: rename __getrandom to sys_getrandom
  * stress-kcmp: break out early if we get multiple ENOSYS errors
  * Fix spelling mistake 1Mhz -> 1 MHz
  * README: fix spelling mistake
  * stress-kill: fix typo in comment
  * Remove 64 byte alignment on shared region, it does not save much
  * Tidy main vars up, add more comments, make ticks_per_sec int32_t
  * Add STRESS_ASSERT macro to catch incorrect stressor array size
  * Make quota block devices message a little clearer and fix typo
  * Use %s instead of %d in stress-malloc signum printing
  * Forgot to include signal.h in helper to get NSIG define
  * Print signal death number as human readable string
  * Warn user if cwd is not read-writeable
  * Show process name when a stressor process exits with an error
  * Fix typo "quotctl" -> "quotactl" in man page

 -- Colin King <colin.king@canonical.com>  Wed, 29 Jul 2015 17:10:10 +0100

stress-ng (0.04.12-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix segfault in metrics because MMAPFORK macro not defined correctly
  * Add --cpu-load-slice option for CPU stressor time slice tweaks
  * Minor re-organising of main globals and make ints into int32_t
  * stress-ng.h: extern some misc funcs
  * stress-pthread: make stress_pthread_func static
  * stress-lockf: make lock helpers static
  * stress-epoll: mlock handle_socket_sigalarm
  * stress-context: make stress_context_init static

 -- Colin King <colin.king@canonical.com>  Wed, 15 Jul 2015 00:44:00 +0100

stress-ng (0.04.11-1) unstable; urgency=medium

  * Makefile: bump version
  * Add README and README.Android to make dist rule
  * Add README
  * Add Android porting notes, thanks to M.Srikanth Kumar.
  * For now, enable ptrace stressor for just linux
  * Remove unwanted sys/regs include from ptrace stressor
  * Make mmapfork help and options build on STRESS_MMAPFORK
  * Don't build ptrace stressor for GNU/HURD
  * Fix stress-mmapfork builds on non-Linux systems
  * Add ptrace stressor
  * Use -pthread rather that -lpthread to allow for static builds
  * stress-aio: cast to (long) for aio_buf for 32/64 bit portability
  * Update syscalls.txt with sigsuspend
  * Add sigsuspend stressor
  * Update syscalls.txt w.r.t obsolete wait3, wait4 calls
  * Add sigpending stressor
  * stress-symlink: add readlink to symlink stressor
  * Add getpeername call to sock stressor
  * stress-quota: ensure we closedir on dir on error exit path
  * stress-socket: initialise len to be sizeof(addr)
  * stress-socket: fix fd resource leak
  * Add mmapmany fork + mmap VM stressor
  * Re-order MEMFD in header
  * Add --yaml option to output data to a structured YAML file
  * socketpair: handle shutdown when we've maxed out socket fds
  * stress-sysinfo: Move ret so checks work on non-Linux systems
  * stress-sysinfo: fix build for non-Linux systems
  * Re-enable xattr tests
  * Update syscalls.txt, add getcpu
  * stress-numa: clean up code, add getcpu call
  * Update syscalls.txt with getsock* calls
  * stress-socket: correct dbg error text
  * stress-socket: call getsockopt() for more stress overhead
  * stress-socket: call getsockname() for more stress overhead
  * stress-quota: improve error handling reporting
  * stress-quota: minor resource leak and stat checks
  * Update syscalls.txt with quotactl
  * Add stress-quota quotactl stressor
  * Make SIEVE macro not size dependent
  * stress-aio-linux: change finish label, fixes close of fd -1
  * Update syscalls.txt
  * Add a fcntl stressor
  * Re-order HDD and HSEARCH in stress-ng.h
  * Correct man page concerning the 0 stressor option
  * Use _SC_NPROCESSORS_CONF stressors when zero stressors selected
  * Update syscalls with NUMA test update
  * Add some NUMA clarifications in the manual
  * Add NUMA stressor
  * stress-lockf: re-align a comment
  * stress-kill: improve comment on kill on -1 pid
  * syscalls - rename aioabi to aiol
  * Add fstatvfs to sysinfo test
  * Add Linux asynchronous I/O io_* system call stressors
  * Add shutdown to syscalls
  * stress-socket: add socket shutdown
  * stress-socketpair: close with shutdown, don't use magic string
  * Update syscalls.txt
  * Make socket pair even more stressy
  * Close pipe, and don't report error on EPIPE as that is expected
  * Add socketpair stressor
  * Try to mlock all sig handlers and critical code into memory
  * If a fork fails, set pid num to zero to avoid killing pid -1
  * Make log type name fields the same width
  * Change "stressors started" to "stressors spawned"
  * Emit perf not enabled message just once.
  * stress-brk: remove incorrect free on ptr

 -- Colin King <colin.king@canonical.com>  Tue, 14 Jul 2015 10:20:00 +0100

stress-ng (0.04.10-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix typo in macro, STRESS_UPD_FLOOD -> STRESS_UDP_FLOOD

 -- Colin King <colin.king@canonical.com>  Thu, 2 Jul 2015 14:40:00 +0100

stress-ng (0.04.09-1) unstable; urgency=medium

  * Makefile: bump version
  * Make stress-udp-flood build dependent on AF_PACKET being defined
  * stress-udp-flood: close fd, fixes resource leak
  * Add UDP flood stressor
  * Stress up to number of cpus configured not number that are online
  * Avoid crazy temperatures in thermal zones
  * Move syslog help to correct section

 -- Colin King <colin.king@canonical.com>  Thu, 2 Jul 2015 10:45:00 +0100

stress-ng (0.04.08-1) unstable; urgency=medium

  * Makefile: bump version
  * Only call tz_free() if STRESS_THERMAL_ZONES defined
  * Rename dump_* to *_dump
  * perf: re-organise, move dump into perf.c, more #if checks
  * Add --tz thermal zone option

 -- Colin King <colin.king@canonical.com>  Wed, 24 Jun 2015 15:12:00 +0100

stress-ng (0.04.07-1) unstable; urgency=medium

  * Makefile: bump version
  * Make stress-sem conditional on STRESS_SEMAPHORE_POSIX
  * Make semaphore stressors linux only because of timeout
  * stress-sem: remove verbose timeout info, it can spam the output
  * stress-sem-sysv: Add timeout to semaphore wait
  * stress-sem: Add timeout to semaphore wait
  * stress-sem-sysv: ensure parent is waiting and not thrashing
  * stress-sem: ensure parent is waiting and not thrashing
  * stress-sem: remove verbose timeout info, it can spam the output
  * stress-sem-sysv: Add timeout to semaphore wait
  * stress-sem: Add timeout to semaphore wait
  * stress-sem-sysv: ensure parent is waiting and not thrashing
  * stress-sem: ensure parent is waiting and not thrashing

 -- Colin King <colin.king@canonical.com>  Thu, 18 Jun 2015 16:34:00 +0100

stress-ng (0.04.06-1) unstable; urgency=medium

  * stess-sysfs: Do not read sysfs files when running as root (LP: #1464073)

 -- Colin King <colin.king@canonical.com>  Fri, 12 Jun 2015 09:44:00 +0100

stress-ng (0.04.05-1) unstable; urgency=medium

  [ Colin Ian King ]
  * Makefile: bump version
  * mincore: fix build for GNU/HURD; make it a no-op
  * stress-mlock: don't build in munlockall for GNU/HURD
  * stress-mlock: don't build in mlockall, munlockall for GNU/HURD
  * Fix MINCORE dependency for GNU/HURD
  * Ensure maximum sizes don't exceed 4GB-1 for 32 bit systems
  * stress-crypt: only use re-entrant crypt_r on Linux for now
  * Make madvise build on non-GNU/HURD systems
  * Add perf reference in manual, update date
  * stress-vm-rw: zero msg_wr just to be totally safe
  * stress-crypt: use reentrant crypt_r to avoid any memory leaks
  * stress-zombie: free items on list head on exit
  * stress-lockf: free items on list head on exit
  * stress-wcstr: fix incorrect wide string size
  * Add int8, int16, int32 and int64 versions of mwc*()
  * Move results emitting code into dump_* functions
  * Increase various stressors upper memory limits
  * Make --aggressive force more CPU migrations and context switches
  * Fix comment for stress_get_ticks_per_second
  * perf: enable inherit flag to trace children
  * Update syscalls.txt with perf and getrandom
  * Add the new --getrandom stressor
  * Fix sigq options, missing because not using STRESS_SIGQUEUE
  * Add Christian Ehrhardt to the contributors list on man page
  * Fix help -h option, was --h, should be -h

  [ Christian Ehrhardt ]
  * stress-ng: avoid builtins when libs shall be tested
  * stress-ng: add stressor for wide character sting operations
  * stress-ng: fix string names
  * stress-ng: avoid compiler error in stress-vector
  * stress-ng: fix EPOLL build

 -- Colin King <colin.king@canonical.com>  Tue, 2 Jun 2015 20:35:00 +0100

stress-ng (0.04.04-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-hdd: make buffer in read/write helpers uint8_t *
  * log: Reduce the scope of n, clean up cppcheck style warning
  * perf: cater for zero time_running case, avoid division by zero
  * Add --log-brief option to make output less verbose
  * print perf counters as , separated decimals
  * perf: scale using lookup table, add in quintillions
  * perf: Add back PERF_FORMAT_GROUP, we get wrong stats otherwise
  * perf: re-work to allow for more HW perf counters
  * Don't build in stress-context for OpenBSD
  * perf: fix build errors on GNU/HURD
  * Add --perf option
  * Fix STRESS_VECTOR, use the NEED_GNUC macro
  * Add context stressor to stress context switch save/restores

 -- Colin King <colin.king@canonical.com>  Sun, 31 May 2015 13:33:00 +0100

stress-ng (0.04.03-1) unstable; urgency=medium

  * Makefile: bump version
  * Forgot to include new OPT_FLAG #defines
  * Allow --class option to specify a list of classes
  * Allow --seq and --all modes to have --class option
  * Make break stress help into generic and per stress test sections
  * stress-epoll: fix spelling mistake in comment "incomming"
  * Manual: break options into stress-ng specific options and stressors
  * Make sysfs conditionally compile on STRESS_SYSFS
  * Add sysfs stressor
  * Fix oom error message with corrupt name because name is not yet set
  * stress-cpu: dither: correct min x boundary check, off by 1
  * Change scope of variables in stress_cpu_parity
  * stress-cpu: stash d and l to overcome over optimization
  * Call "stressors" workers
  * Manual, call stressors and processes "workers"
  * Sync up syscalls.txt with latest changes to stressors
  * Add chdir stressor
  * Add syncfs otion to hdd stressor
  * stress-mlock: add mlockall/munlockall stressing too
  * Add fsync, fdatasync hdd stressor options
  * stress-cpu: add rand48 random number generator family cpu method
  * Add human readable time duration to results output

 -- Colin King <colin.king@canonical.com>  Thu, 21 May 2015 16:24:00 +0100

stress-ng (0.04.02-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-cpu: Add dithering stress cpu method
  * stress-cpu: re-order cpu methods
  * stress-cpu: Add parity computation method
  * Fix in-built help in a few places
  * Fix typo in manual, crc -> crc16

 -- Colin King <colin.king@canonical.com>  Mon, 11 May 2015 10:52:00 +0100

stress-ng (0.04.01-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-rlimit: for now, make this Linux only
  * stress-rlimit: add loop limit checking
  * stress-mlock: report mlock failure with pr_failed_err()
  * stress-itimer: remove the build dep on STRESS_TIMER
  * stress-ng: Fix --seq mode
  * Add resource limit stressor, stress-rlimit
  * stress-chmod: use creat instead of open
  * Makefile: sort order of sources, stress-yield, stress-xattr
  * Add itimer stressor
  * Fix typo: mimcore -> mincore
  * Add mlock stressor
  * stress-stack: Don't need alloc.h included, it comes in stdlib.h

 -- Colin King <colin.king@canonical.com>  Mon, 4 May 2015 21:08:00 +0100

stress-ng (0.04.00-1) unstable; urgency=medium

  * Makefile: bump to version 4.0, update codename
  * Update syscalls.txt with more annotations
  * stress-hdd: forgot to include sys/uio.h
  * mincore: cater for BSD mincore API difference
  * Move do_wait inside #if/#endif to avoid warning on BSD systems
  * Manual: sort --hdd-opts options
  * stress-hdd: add utimes metadata update --hdd-opts option
  * stress-xattr: also use fgetxattr
  * stress-dup: add dup2 call on same fd
  * stress-verify: refactor verify checking, small optimisation
  * stress-timer: add timer overrun accounting
  * stress-chmod: fix retries abort check
  * Re-order stack-fill option in table
  * Manual: fix spelling mistake, maxiumum -> maximum
  * stress-memfd: initialize fd and maps for correctly cleanup handling
  * Update syscalls.txt (added timerfd, minor other tweaks)
  * Add timerfd stressor
  * stress-timer: Fix random timers to adjust correctly by randomized rate
  * stress-memfd: make bogo ops match iterations rather than per memfd-create
  * Add stress-memfd stressor and fix mincore/pagein builds
  * Update syscalls.txt with a fuller set of syscalls
  * stress-get: add calls to time() and utime()
  * Add aggressive mode CPU affinity changing
  * stress-affinity: add a yield to push IPIs up
  * Make inotify test depend on glibc 2.9 or higher
  * Make aio test depend on glibc 2.1 or higher
  * Make affinity test depend on glibc 2.3.0 or above
  * Update syscall.txt with readv/writev
  * Add iovec readv/writev mode to --hdd-opts
  * stress-sem: don't report EINTR as an error on sem_wait
  * stress-chmod: give up of we took too many tries to create file
  * stress-epoll: add more delay on re-try connect failures
  * stress-epoll: use a saved errno to report error
  * Handle fork() EAGAIN correctly by re-trying
  * stress-lease: correct and improve failure error messages
  * stress-wait: increase wait timeout to 8 seconds
  * stress-inotify: break out of init loop if end of tests, increase retries
  * stress-sysinfo: make EACCES non-fatal error on stat

 -- Colin King <colin.king@canonical.com>  Mon, 27 Apr 2015 13:24:00 +0100

stress-ng (0.03.22-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-eventfd: check if termination flag set
  * stress-tee: handle EINTR in tee()
  * Make timeval_to_double an inlined func
  * stress-sigfd: return rather than _exit() on error

 -- Colin King <colin.king@canonical.com>  Sat, 18 Apr 2015 13:04:00 +0500

stress-ng (0.03.21-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-crypt: fix build on FreeBSD
  * stress-mmapmany: include signal.h to stop build warnings
  * Make features.h dependent on GLIBC
  * Make help info less than 80 chars wide
  * stress-lockf: explicitly ignore return from waitpid and kill
  * Add device, filesystem and pipe classes, re-classify some tests
  * stress-pthread: fix comment
  * Only allow futex test if system call is defined
  * Check if rdrand is supported if sequential mode selected
  * Make stress-lockf more aggressive with more concurrent locking
  * Rename NEED_GLIB to NEED_GLIBC and use on newer system calls
  * Add tee stressor
  * Fix wait spawn to return pid_t rather than int
  * Fix sem spawn to return pid_t rather than int
  * Fix sem-sysv spawn to return pid_t rather than int
  * Fix lease spawn to return pid_t rather than int
  * Fix fifo spawn to return pid_t rather than int
  * Fix epoll spawn to return pid_t rather than int
  * Fix typo: _GNUC__ -> __GNUC__
  * Add crypt stressor
  * Add --timer-rand option for more of a mix in timer scheduling
  * Fix uninitialised timer frequency in stress-timer
  * Fix typo in manual
  * Check for fork EAGAIN failure, polled retry
  * Add mmanmany stressor
  * The current VFORK build check fails, just make it build w/o checks for now
  * Add zombie stressor - fill up process table with children wait to be reaped
  * stress-null: fix comment
  * Don't define HOT and OPTIMIZE3 for older versions of GNUC
  * Add glibc and gcc version macros, use them for rdrand and vm-rw stressors
  * Add depends on libattr1-dev
  * Option --readahead-bytes should only built in if readahead supported
  * stress-cpu: Use more optimal gray to integer conversion
  * stress-cpu: minor tweaks to ensure optimizer does not over optimize
  * Add and use OPTIMIZE3 -O3 macro
  * Forgot to add the --str-method to the help
  * Add the str string stressor
  * stress-xattr: fix incorrect clean up path on error
  * Add HOT macro, add it to cpu intensive busy loops
  * stress-readahead: build only if readahead allowed on system
  * Add xattr stressor
  * stress-kill: Add some more kill variations
  * Update syscalls table
  * stress-mmap: unmap buf, fixes resouce leak
  * Add readahead I/O stressor
  * Add deep function call cpu stressor method
  * stress-vm: add rowhammer memory stressor

 -- Colin King <colin.king@canonical.com>  Tue, 14 Apr 2015 16:15:00 +0500

stress-ng (0.03.20-1) unstable; urgency=medium

  * Makefile: bump version
  * sched: Fix build warning on get_sched_name on GNU HURD
  * stress-hdd: Fix incorrect format specifier %zu for a uint64_t
  * stress-fallocate: Fix off_t printf warnings on 32 bit GNU HURD
  * Fix resource leak (file descriptor) on error exit of stress-hdd
  * Fix Manual, clarify the action of hdd stressor
  * stress-aio: reduce scope of ret
  * Fix missing stressor name in pr_err() messages
  * Fix missing stressor name in pr_inf() and pr_dbg() messages
  * Fix missing stressor name in pr_fail() messages
  * stress-hdd: fix verify mode for hdd stressor
  * stress-hdd: fix missing read if no read preference specified
  * sched: fix default priority levels and lack of class name in messages
  * stress-hdd: fix read of end of file when generated with random writes
  * Fix extraneous leading space after the "hogs:" message
  * stress-hdd: fix false error reports on short reads
  * stress-hdd: fix noisy "incomplete reads" debug message
  * stress-fallocate: fix incorrect errors reported on fallocate sizes
  * stress-fallocate: fix error messages, they are rather meaningless
  * stress-aio: report correct errno on async error
  * stress-aio: handle EAGAIN and EINTR correctly
  * stress-hdd: POSIX_FADV_RND should be POSIX_FADV_RANDOM

 -- Colin King <colin.king@canonical.com>  Thu, 26 Feb 2015 17:17:00 +0000

stress-ng (0.03.19-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-sem: fix spelling mistake in comment: destory -> destroy
  * Manual: fix spelling mistake: successfull -> sucessful
  * Manual: fix typo: summaries -> summarise
  * Manual: vecmath: Replace x with \(mu multiply sign for correct formatting
  * Manual: Fix udp port description, add the default base port being used.
  * Manual: remove deprecated --hdd-sync option
  * Manual: fix typo: mremmap -> remap
  * Manual: Replace x with \(mu multiply sign
  * Manual: Fix typo: randonly -> randomly
  * Manual: Fix spelling mistake: hightest -> highest
  * Manual: Correct description for --fifo option
  * Manual: Fix spelling mistake and epoll_wait section
  * Rename id to s_id to stop variable shadowing
  * Move scope of j, removes shadowing of j too.
  * stress-aio: clean up clang warnings on integer conversions
  * Re-format and slightly re-word debian control description text
  * Remove trailing white spaces from lines and empty lines
  * Remove duplicated changelog entries
  * Fix macro expansion overflows on 32 bit architectures
  * stress-matrix: clean up some more cppcheck style warnings
  * stress-longjmp: move counter c, cleans up cppcheck style warning
  * stress-inotify: fix buffer bounds checking on inotify input
  * stress-ng: remove some debug that never got printed
  * stress-pipe: ret should be ssize_t
  * stress-hdd: ret should be ssize_t
  * stress-mmap: better error handling on write
  * out-of-memory: add better write error checking
  * stress-null: better error handling on write
  * stress-lockf: better error handling on write
  * stress-fault: better error handling on write
  * stress-vm-rw: better error handling on read/write
  * stress-sigfd: better error handling on read
  * stress-seek: better error handling on read/write
  * stress-procfs: better error handling on read
  * stress-poll: better error handling on read/write
  * stress-pipe: better error handling on read/write
  * stress-inotify: better error handling on read/write
  * stress-hdd: better error handling on read/write
  * stress-switch: cater for zero write w/o error
  * stress-fifo: better error handling on read/write
  * stress-pipe: better error handling on read/write
  * stress-urandom: better error handling on read
  * stress-zero: better error handling on read
  * stress-eventfd: better read/write handling
  * print correct number of hogs when --class is used

 -- Colin King <colin.king@canonical.com>  Mon, 23 Feb 2015 15:58:00 +0000

stress-ng (0.03.18-1) unstable; urgency=medium

  * Makefile: bump version
  * Move order of hadamard matrix method, now in alphabetical order
  * Fix macro typos - STESS -> STRESS (LP: #1423241)
  * Add in matrix info into help

 -- Colin King <colin.king@canonical.com>  Wed, 18 Feb 2015 16:08:00 +0000

stress-ng (0.03.17-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix name clash on union on *BSD systems
  * Explicitly ignore return from wait*() calls by (void) cast
  * Add minimize/maximize to matrix size
  * Add --cache-prefetch option
  * Make opt_sequential int32 and print out hogs if --seq is being used
  * Handle builds for system calls that don't exist
  * stress-vm-rw: include missing header
  * Ignore args in kcmp for systems that don't support this call
  * Forgot ULL after fibonacci uint64_t assignment, warning on 32 bit mips
  * Add longjmp stressor
  * Constify a few more function args
  * Add in some shifts to vecmath
  * Constify a few more func args
  * Make cache no-ops into do {} while (0) statement
  * Move PR_* bit flags to bottom nybble, makes stress-ng smaller
  * Fix spelling mistake in manual: subtrace -> subtract
  * Forgot to capitalise the matrix product methods
  * Add two more matrix product methods
  * man page: long double floats -> floats for matrix
  * Add matrix stressor with a bunch of stressor methods
  * stress-shm-sysv: initialise shm_ids as -1 to indicate not set
  * Use semun union when passing values to semctl, fixes powerpc segfault
  * stress-rdrand: move #includes to fix build warning on ARM
  * Make mallopt code depend on GNUC and linux
  * Reduce MAX stress-fallocate allocation size for 32 bit systems
  * Move #includes in io-priority to stop build warnings
  * Add --malloc-thresh tuneable option
  * Used #if defined(...) consistently.
  * Munge stressor names when showing hoggers
  * Remove repeated #if defined() checks, simplify them into stress-ng.h
  * Add another example to the manual
  * Increase maximum lease breakers
  * stress-lease: max sure the pid array is large enough
  * Add --aggressive option
  * Don't print null string of no hogs listed when dispatching hogd
  * Add --minimize and --maximize options
  * Add --stack-fill option
  * Update syscalls.txt with recently added syscalls
  * stress-fallocate: only use fallocate if FALLOC_FL_* defined
  * stress-fallocate: employ linux fallocate on linux builds
  * Add --fallocate-bytes option

 -- Colin King <colin.king@canonical.com>  Tue, 17 Feb 2015 18:28:00 +0000

stress-ng (0.03.16-1) unstable; urgency=medium

  * Makefile: bump version again
  * Fix missing .TP in man page
  * Re-work the "dispatching hogs" message to log atomically
  * Add --syslog option to log non-debug messages to syslog
  * stress-hdd: don't use strtok_r, we're not threaded
  * Just define KCMP_* ourselves, broken distros don't have linux/kcmp.h
  * stress-kcmp: close fd1, fix resource leak
  * Add kcmp stressor
  * Remove unnecessary { }
  * Remove redundant assignment of first enum to zero
  * Make --random 0 select the number of on-line CPUs
  * Forgot to make RDRAND check arch specific
  * Add check to see if rdrand is supported and skip stressor if not
  * stress-pthread: increase to 1024 pthreads per stressor
  * stress-pthread: handle error correctly; as from the return from pthread*
  * Make pr_failed more generic and make a new pr_failed_errno macro

 -- Colin King <colin.king@canonical.com>  Fri, 13 Feb 2015 19:40:00 +0000

stress-ng (0.03.15-1) unstable; urgency=medium

  * Makefile: bump version
  * Don't make sieve static, it wastes space in the executable
  * Keep make quiet on builds that don't support _Decimal types
  * Makefile: more smarts to conditionally build stress-cpu
  * remove STRESS_FLOAT_DECIMAL
  * Try to build with _Decimal* floats, if fail, build without
  * Check for __int128 and _Decimal support
  * Don't complain about IPC_RMID failure if it's already been reaped
  * Don't report sem-op errors on EINTR
  * Only report OOM restarts and nomems if they actually occurred
  * stress-chmod: remove some unnecessary debug info
  * stress-socket: don't emit errno if EINTR
  * stress-udp: don't emit errno if EINTR
  * stress-chmod: only report number of retries if a retry occurred
  * stress-stack: handle OOM killer with monitoring parent
  * Add set_max_limits() to push user limits to maximum allowed
  * stress-cpu: re-work math stressors with macros
  * Add decimal{32|64|128} math ops in cpu stressor
  * Re-work floating point and complex floating point stressors
  * Re-work int stressors to use generic macro, and add int128 test

 -- Colin King <colin.king@canonical.com>  Mon, 9 Feb 2015 23:28:00 +0000

stress-ng (0.03.14-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix build warning for systems w/o _SC_PAGESIZE
  * Make semaphore creation non-fatal
  * Fix a few warnings on gcc 4.5.3 (NetBSD)
  * Make STRESS_SIGFD linux only
  * Re-order sendfile #define
  * Re-order hdd and hsearch #defines
  * Forgot to make futex linux only
  * Typo: replace __linux with __linux__
  * Use pow since powl has less precision than advertised warning on FreeBSD
  * Forgot to remove mremap from help if non-Linux
  * Update manual, stress-mremap is linux only
  * Make mremap test linux only
  * stress-mremap: move to using page size helper
  * Add helper to get cpu clock ticks
  * Add number of processors online helper.
  * Add page size helper, we don't need to repeat the sysconf calls
  * Add malloc stressor
  * Add some more comments
  * Clean up BSD workarounds
  * stress-brk: wrap an overly long line
  * Add memory remapping stressor
  * Turn off madvise DONTNEED as it can cause us checking errors
  * Add another NetBSD long double workaround
  * stress-hdd - don't allow fadvise on GNU HURD
  * Add vmsplice stressor
  * Correct error message on pipe failure
  * Fix up latest stressors, re-order options and add vm-rw-* help
  * Add splice stressor
  * Add vm-rw stressor
  * Add read64 and write64 vm memory stress methods.

 -- Colin King <colin.king@canonical.com>  Thu, 5 Feb 2015 15:22:10 +0000

stress-ng (0.03.13-1) unstable; urgency=medium

  * Makefile: bump version
  * Cater for non-existent long double math functions in NetBSD
  * mounts: forgot to handle NetBSD in mount detection
  * Make mounts build for NetBSD too
  * Disabled stress-wait for NetBSD - can't see how to do CONT sig wait
  * Cater for systems that do not have MAP_ANONYMOUS
  * Add NetBSD support to stress-stack
  * Make vector gcc'isms compile in for modern versions of gcc only
  * stress-hdd: void unused params
  * Also catch SIGILL for FreeBSD
  * Remove trapping of SIGILL
  * stress-qsort: fix cmp3 byte-wise re-ordering
  * include signal.h in stress-pthread to fix FreeBSD build
  * Minor source reformatting on stress-ng.c
  * Reduce the precision and number of iterations for nsqrt
  * stress-shm-sysv: also shrink and re-try if ENOMEM occurs
  * Add some feedback of shm-sysv had to shrink shared memory size
  * Cater for EINVAL on shmget if size is too large.
  * Mungify stressor names when invoking the stressor
  * Drop default System V shared memory size to 8MB for *BSD kernels
  * Add check for BSD invalid chmod mode bits error
  * Fix printing of stressor names, some names too long and _ -> - conversion
  * stress-cache: put { } braces around cflush and mfence
  * stress-mq: intialise mq to -1 to avoid gcc warning (false positive)
  * Add full read checks in stress-hdd read stressor loops
  * stress-hdd: remove debug cruft
  * Forgot to escape some - hyphens in manual
  * Stress-hdd: remove ad-hoc open flags, replace with --hdd-opts option
  * Manual: fix spelling, destory -> destroy
  * Add vector maths stressor
  * Man page: naive -> naïve
  * Manual, lease-breakers: for --> to
  * Don't handle SIGSEGV and SIGBUS
  * Don't build sem-sysv for GNU HURD
  * Add sections of man pages for sys calls and libc functions
  * Add System V shared memory stress test
  * Fix error path on SYSV sem creation - need to reap semaphore
  * Re-work POSIX sem test to be aligned with SYSV sem test
  * Remove POSIX semaphore header, not required
  * Add System V semaphore stressor

 -- Colin King <colin.king@canonical.com>  Sun, 1 Feb 2015 15:22:10 +0000

stress-ng (0.03.12-1) unstable; urgency=medium

  * Makefile: bump version
  * Add udp to --help output
  * remove need to setup unix pathname in stress-socket
  * stress-epoll: use net helper funcs
  * stress-mq: memset msg to zero to stop valgrind complaining
  * Clear epoll_event struct; warning from valgrind
  * Add net helper functions, refactor udp and socket stressors
  * Add udp stressor
  * Reduce the minimum timer frequency to 1Hz
  * Remove duplicate error message in rdrand stressor
  * Correct error messages, removed "failed" and trailing "\n"
  * Clear alternative signal stack, stops cppcheck warning
  * Limit sscanf field to avoid overflows
  * Remove memory locking, it wasn't such a good idea after all

 -- Colin King <colin.king@canonical.com>  Thu, 29 Jan 2015 11:49:00 +0000

stress-ng (0.03.11-1) unstable; urgency=medium

  * Makefile: bump version
  * Add --hdd-sync, --hdd-dsync, --hdd-direct, --hdd-noatime options
  * Add sigfd stressor
  * Move mount handling helper functions to mounts.c
  * Add --brk-notouch option
  * Account of out of memory nomems in stress-brk
  * Explicitly ignore *close*() failures with (void) cast
  * Update copyright at end of manual
  * Update syscalls.txt with brk/sbrk calls
  * Add a brk stress tester and --brk, --brk-ops options
  * Fix incorrect comment on bigheap stressor function

 -- Colin King <colin.king@canonical.com>  Sun, 25 Jan 2015 14:23:00 +0000

stress-ng (0.03.10-1) unstable; urgency=medium

  * Makefile: bump version
  * Make mask ptrdiff_t and cast to allow clean 32 bit build
  * Use ptrdiff_t for addr math
  * Remove need for ms_flags if building for GNU HURD
  * Cater for GNU HURD not supporting mincore()
  * Cater for msync not functioning for GNU HURD
  * Add --mincore-random option
  * Update syscalls.txt with mincore test
  * Remove the page reading from mincore
  * Add mincore stressor

 -- Colin King <colin.king@canonical.com>  Sat, 24 Jan 2015 13:43:00 +0000

stress-ng (0.03.09-1) unstable; urgency=medium

  * Makefile: bump version
  * Add bounds checking on data from /proc
  * Make stress-mq a no-op for non-Linux
  * Update syscalls table
  * Make mq a linux only stressor
  * Add mq stressor for POSIX message queues
  * Add --mmap-protect page protection settings option
  * Add the chmod stressor

 -- Colin King <colin.king@canonical.com>  Tue, 13 Jan 2015 11:54:00 +0000

stress-ng (0.03.08-1) unstable; urgency=medium

  * Makefile: bump version
  * Update copyright year to sources
  * Add epoll stressor
  * stress-vm: reduce scope of addr
  * stress-mmap: clarify calculation precedence of & in ternary expr
  * stress-memory: reduce scope of addr
  * Fix --sequential mode, correctly set up number of procs and pid list

 -- Colin King <colin.king@canonical.com>  Fri, 2 Jan 2015 09:57:11 +0000

stress-ng (0.03.07-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix pluarity of --lease man page description
  * Fix int64 float descriptions in man page
  * Make lease help info appear only if it is supported
  * Make assumption about nice limits if getrlimit fails
  * Close and abort rather than close and break
  * Fix incorrect closing on in stress-lease
  * Clear buffer in lockf
  * Check return of unlocking fcntl call in stress-lease
  * Forgot to add stress-lease.c to Makefile
  * Add lease stressor and --lease, --lease-ops, --lease-breakers
  * Don't print full help on failed getopt '?' returns
  * Add dup stressor and --dup, --dup-ops options
  * Update syscalls table
  * Minor lockf corrections in manual
  * Add POSIX lockf file locking stressor
  * Fix int64_{float|double|longdouble} verifies
  * Add mixed integer and floating point cpu stressors
  * Manual: don't -> do not

 -- Colin King <colin.king@canonical.com>  Wed, 31 Dec 2014 13:13:13 +0000

stress-ng (0.03.06-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile: add mascot svg to dist
  * Make getpid pid const
  * Don't use 0600 flags, use constants instead
  * Add --mmap-file and --mmap-async file based mmap options
  * Make stress-mmap helper functions static
  * Update manual for the new unix --sock-domain option
  * Add unix --sock-domain option
  * Add cache fencing and cache flushing to cache stressor
  * Add mascot svg
  * Fix comment in modulo-x comment, 20th -> 23rd

 -- Colin King <colin.king@canonical.com>  Mon, 29 Dec 2014 15:57:00 +0000

stress-ng (0.03.05-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix stress-poll random slow hangs running on --poll-ops N
  * Find index into stressors via id
  * stress-fifo: cater for zero reads on closed fifo
  * Tidy up stress-ng.h, re-ordering and adding more comments
  * Re-organise per stressor process info into procs
  * Remove hdd related global vars, add stress_set_hdd* helpers
  * Remove global socket_port, use helper stress_set_socket_port instead
  * Remove unused opt_vm_stride
  * Remove global mmap_bytes, use helper stress_set_mmap_bytes instead
  * Remove vm related global flags, add stress_set_vm_* helpers
  * Remove global cpu_load, use helper stress_set_cpu_load instead
  * Remove global sem_procs, use helper stress_set_sem_procs instead
  * Make opt_sequential static
  * Remove global fifo_readers, use helper stress_set_fifo_readers instead
  * Remove global pthread_max, use helper stress_set_pthread_max instead
  * Remove global seek_size, use helper stress_set_seek_size instead
  * Remove global qsort_size, use helper stress_set_qsort_size instead
  * Remove global sendfile_size, use helper stress_set_sendfile_size instead
  * Remove global hsearch_size, use helper stress_set_hsearch_size instead
  * Remove global lsearch_size, use helper stress_set_lsearch_size instead
  * Make opt_tsearch_size static
  * Remove global tsearch_size, use helper stress_set_tsearch_size instead
  * Replace opt_fstat_dir with stress_set_fstat_dir()
  * Replace sem_ok bool with OPT_FLAGS_SEM_INIT opt_flag bit
  * Remove opt_timer_freq, replace with stress_set_option_freq()
  * Make opt_class static
  * Make array opt_ops static
  * Make opt_backoff static
  * Make opt_sched and opt_sched_priority static
  * Make started_procs array static
  * Make procs, opt_ionice_class, opt_ionice_level static
  * No need to extern procs array
  * No need to extern opt_ionice_class, opt_ionice_level
  * Remove globals for fork/vfork opts, use stress_set_{fork,vfork}_max
  * Remove global opt_denties, use helper stress_set_dentries instead
  * Remove global bsearch_size, use helper stress_set_bsearch_size instead
  * Remove global bigheap_growth, use helper stress_set_bigheap_growth instead
  * Remove global aio requests, use helper stress_set_aio_requests instead
  * Remove tailing . on man page title

 -- Colin King <colin.king@canonical.com>  Wed, 17 Dec 2014 14:37:41 +0000

stress-ng (0.03.04-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix verify checks in int{64,32,16,8} cpu stressors
  * lock-mem: only use mlockall if _POSIX_MEMLOCK is defined
  * stress-vm: add finer grained bogo ops
  * Set MIN_OPS to be 1, 100 is quite large for slow vm tests
  * stress-vm: use PRIME_64
  * stress-denty: use PRIME_64
  * Define PRIME_64 to be large 64 bit prime value
  * Fix thinko in prime striding of memory
  * Add --denty-order option to try and mix up dentry unlinking order
  * Remove the reference to /tmp being used as sendfile data
  * Add pthread stressor
  * Re-work seek offset, the module fails on some arm 32 builds
  * stress-fifo: fix error message

 -- Colin King <colin.king@canonical.com>  Fri, 12 Dec 2014 12:23:12 +0000

stress-ng (0.03.03-1) unstable; urgency=medium

  * Makefile: bump version
  * Update date in man page
  * IONICE_* opts are linux only
  * Remove unwanted column headings
  * Stress semaphore harder by multiple children
  * Update syscalls, add send recv
  * Add some more comments to stress-ng.h
  * Move some #defines around
  * stress-fork: use renamed constants
  * Add in more #define'd min/max/default constants
  * Re-order OPT_ case statement into alphabetical order
  * Hide vm stressor option inside stress-vm
  * Hide cpu stressor option inside stress-cpu
  * stress-fifo: close fifo on exit
  * stress-socket: add --sock-domain option
  * stress-socket: use send/recv instead of write/read
  * Use ssize_t for n to get write size
  * Add named fifo stressor
  * Break casting of uintptr_t into stages because GCC 4.9.2 complains
  * stress-vm: no need to check sz if it is a 32 bit integer
  * Force gcc not to optimise out the alloca

 -- Colin King <colin.king@canonical.com>  Fri, 5 Dec 2014 23:19:00 +0000

stress-ng (0.03.02-1) unstable; urgency=medium

  * Makefile: bump version
  * free procs array in child stressor, stops valgrind complaining
  * stress-vm: don't use abs, use UNSIGNED_ABS instead
  * Ensure mwc internal state is intialised.
  * stress-memcpy: copy back buffer to share memory region
  * stress-affinity: add --affinity-rand option
  * man page: fix - hypenations
  * stress-vm: remove debug on vm stressor names, too noisy
  * mwc: move mwc constants into a struct and inline mwc
  * Deprecate --noclean option
  * Deprecate --vm-stride
  * man page: Fix spelling mistakes and re-phrase some text for clarity
  * stress-vm: use correct name when checking prime-gray-* results
  * Add --stress-vm documentation in man page
  * stress-vm: Add different vm stressors and --vm-method option

 -- Colin King <colin.king@canonical.com>  Tue, 2 Dec 2014 16:13:15 +0000

stress-ng (0.03.01-1) unstable; urgency=medium

  * Makefile: bump version, update codename
  * More --metrics explanation, expand other mior options as well
  * Use %zu print format specifier for size_t variable
  * Fix builds for OpenBSD too
  * Makefile: minor tweaks to build rules
  * stress-cpu: remove cpow and csinl csinl for FreeBSD builds
  * stress-cpu: build without warnings with clang
  * madvise: fix build issues on FreeBSD
  * stress-sysinfo: build for FreeBSD
  * Fix build issues on FreeBSD
  * stress-cpu: zeta precision should be using cabsl
  * Use double complex for fft
  * stress-nice: include signal.h
  * stress-tsearch: use & rather than &&
  * stress-lsearch: use & rather than &&
  * opt_flags && OPT_FLAGS_VERIFY should be using & rather than &&
  * Remove duplicate const
  * Remove duplicate func declaration, rename other to stress_func
  * Fix division by zero on r_total, emit zero if num procs is zero
  * Fix spelling mistake "performance" in man page
  * Fix float man page entry
  * Fix clongdouble man page entry
  * Add hsearch and class options to --help

 -- Colin King <colin.king@canonical.com>  Thu, 27 Nov 2014 16:28:05 +0000

stress-ng (0.03.00-1) unstable; urgency=medium

  * Makefile: bump to version 0.03.00
  * Clarify cpu stressors and tidy up the table formatting
  * Reduce number of loops for int, float and complex by factor of 10
  * Add cpu complex stressors to man page
  * Add complex math stressors, make float macro use appropriate trig funcs
  * stress-aio: Fix spelling mistake "Succeeded" in comment
  * stress-cpu: fix spelling mistake "version" in comment
  * Add one more stress-ng example to man page
  * stress-sysinfo: make ret linux only
  * stress-sysinfo: make clk not linux only
  * Remove linux only restriction for --times option
  * sysinfo: check for times() returning -1
  * Check for time() error correctly
  * Make stress-aio linux only
  * Output metrics in terms of time in wall clock and user+sys times
  * stress-socket: terminate child properly to fix process accounting
  * Make metrics based on child usr and sys ticks rather than wall clock times
  * Force gcc from over-optmising loop cpu stressor accumulates
  * Fix flock stress on open failure because of race on same file
  * Update syscalls text file
  * Add stack overflow stressor
  * Fix flock - ensure it locks on one file between all workers
  * Add hsearch stressor
  * Add async I/O aio stressor
  * Add --class option
  * stress-cpu: Move math constants and suffix them with L
  * Add Euler–Mascheroni (gamma) calculation in cpu-stress
  * Fix another spelling mistake in man page

 -- Colin King <colin.king@canonical.com>  Mon, 24 Nov 2014 09:31:00 +0000

stress-ng (0.02.29-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix spelling mistake in man page
  * Add seek stressor and --seek, --seek-ops, --seek-size options
  * Add memcpy memory copying stressor
  * Makefile: remove gcov options that got accidentally added

 -- Colin King <colin.king@canonical.com>  Fri, 21 Nov 2014 10:19:00 +0000

stress-ng (0.02.28-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-cpu: force matrixprod to actually save the results
  * Use temp dir helpers to run stressors in temp directory
  * Add temporary dir helpers

 -- Colin King <colin.king@canonical.com>  Thu, 20 Nov 2014 09:40:00 +0000

stress-ng (0.02.27-1) unstable; urgency=medium

  * Makefile: bump version
  * stress-utime: use also utime and make futimes linux only
  * stress-fault: use posix_fallocate instead of fallocate
  * stress-fault: clarify negation on boolean expression
  * stress-hdd: close file on error exit path
  * Use PATH_MAX for filename sizes
  * stress-hdd: use temp filename helper
  * stress-fallocate: use temp filename helper
  * stress-inotify: use temp filename helper
  * stress-flock: open using S_IRUSR | S_IWUSR
  * stress-fault: open using S_IRUSR | S_IWUSR
  * stress-denty: open using S_IRUSR | S_IWUSR
  * stress-dir: use temp filename helper
  * stress-link: use temp filename helper
  * stress-rename: use temp filename helper
  * stress-utime: use temp filename helper
  * stress-sendfile: use temp filename helper
  * stress-flock: use temp filename helper
  * stress-fault: use temp filename helper
  * stress-dentry: use temp filename helper
  * Add stress_temp_filename for standard temp filename building
  * stress-dentry: include instance number in filename
  * Catch a range of signals and handle termination better
  * Re-work process wait by re-writing this with a helper
  * Fix build issues on Arch
  * Man page: tweak width for cpu methods to work on wide ttys
  * Only print out page fault stats to debug
  * Correctly wait for all running processes to terminate
  * Remove redundant exit check
  * Add page fault stressor
  * Remove -g flag from Makefile
  * Add lsearch stressor
  * Add tsearch stressor
  * Ensure we allocate in multiples of 8 elements
  * Add bsearch stressor
  * stress-poll: set data in correct place, fixes verify failures
  * Make hyperbolic cpu test more demanding
  * Make trig cpu test more demanding
  * Add 3 more hash cpu stressors

 -- Colin King <colin.king@canonical.com>  Thu, 13 Nov 2014 10:49:00 +0000

stress-ng (0.02.26-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile: include syscalls.txt in dist
  * Fix cut-n-paste error on waitpid for socket_server
  * Ignore args in no-op mincore build case
  * Make mincore a no-op for GNU HURD
  * Don't allow wait stressor if building for GNU HURD
  * Forgot to make times option Linux only too
  * Make --times option Linux only
  * Only print the names of stressors if they are going to run
  * Ensure we have read all the inotify events
  * Add the new --times option to show system and user times
  * stress-msg: wait for child to exit
  * stress-inotify: ignore EINTR on select as an error
  * stress-eventfd: wait for child to die
  * stress-vm: wait for child to die
  * stress-switch: wait for child to die
  * stress-socket: wait for children to die
  * stress-sigq: wait for child to die
  * stress-poll: wait for child to die
  * stress-pipe: wait for child to die
  * stress-bigheap: wait on child after killing it
  * Add vfork to syscalls.txt
  * Add --vfork, --vfork-ops, --vfork-max options
  * stress-bigheap: don't treat EINTR on waitpid as an error
  * Add mincore to syscalls.txt
  * Add the --page-in option to page in out-of-core pages
  * stress-cpu: run all cpu methods rather than sqrt() by default
  * stress-vm: treat EINTR on waitpid as a not a reportable error
  * stress-eventfd: treat read/write EINTR as not a reportable error
  * stress-msg: treat EINTR as not a reportable error
  * Make poll and select act on multiple pipe fds
  * Add madvise to syscalls.txt
  * Enable random madvise() advice for mmaps, add --no-madvise option
  * Fix spelling mistake in coredump.c
  * Add table of syscalls/libc vs test coverage
  * stress-fstat: add more stat* calls, don't spin if no valid files
  * Modify started on text to be more like original stress tool
  * Add wait stressor and --wait --wait-pid options

 -- Colin King <colin.king@canonical.com>  Sat, 8 Nov 2014 14:24:00 +0000

stress-ng (0.02.25-1) unstable; urgency=medium

  * Makefile: bump version
  * Write file entry removal info to stderr rather than stdout
  * Enable urandom for GNU HURD
  * stress-fnotify: handle fnotify running out of resource
  * Use timer_create for linux only
  * stress-eventfd: make it build only for linux systems
  * Forgot to add stress-eventfd.c
  * stress-inotify.c: reduce scope of dirent
  * stress-futex.c: reduce scope of variable ret
  * stress-cpu.c: reduce scope of variable fn
  * Replace stress fields with STRESSOR macro
  * Check for timeout as an error and sanity check inotify buffer size
  * Add stress-inotify and --inotify --inotify-ops options
  * man page: fix spelling mistake
  * parse-opts.c: fix spelling mistake
  * Makefile: fix spelling mistake
  * Fix more spelling mistakes in changelog
  * Fix spelling mistake in changelog
  * stress-clock: fully clear sevp
  * Re-order long_options to make it easier to find options
  * stress-sysinfo: move i to reduce scope
  * Fix type on null ptr check on mnt
  * Add sysinfo stressor and --sysinfo --sysinfo-ops options
  * Make STRESS_PROCS linux only in stress-ng.h
  * Add procfs stressor and --procfs --procfs-ops options
  * Update manual date
  * Add note about matrix produce CPU stressor
  * Fix rdrand unrolled comment
  * Re-order stress_op enum
  * Re-order stress_id enum
  * Remove redundant extra loop in stress_pipe
  * Add linux eventfd stressor
  * Add stress-clock, re-order man page and help info

 -- Colin King <colin.king@canonical.com>  Mon, 3 Nov 2014 19:16:00 +0000

stress-ng (0.02.24-1) unstable; urgency=medium

  * Makefile: bump version
  * Free procs on calloc failure
  * stress-open: determine max number of fds allowed to open
  * stress-vm: Handle WIFSIGNALED if waitpid succeeded
  * Handle WIFSIGNALED if waitpid succeeded
  * stress sock should be called sock and not socket in the metrics info
  * Make futex waker verify less pedantic
  * fix getpriorities returning < 0 for valid priority values
  * Fix order of null stressor
  * Add get stressor and --get, --get-ops options
  * Add sendfile stressor and --sendfile, --sendfile-ops, --sendfile-size
  * Re-order options man page
  * Sort options in mini help
  * Add null stress test and --null, --null-ops options
  * Add zero stressor and --zero, --zero-ops options
  * Add kill stressor and --kill, --kill-ops options

 -- Colin King <colin.king@canonical.com>  Thu, 30 Oct 2014 22:14:00 +0000

stress-ng (0.02.23-1) unstable; urgency=medium

  * Makefile: bump version
  * Initialise finish time in case it is never run (LP: #1387104)
  * Add futex stressor (LP: #1386831)

 -- Colin King <colin.king@canonical.com>  Wed, 29 Oct 2014 10:32:00 +0000

stress-ng (0.02.22-1) unstable; urgency=medium

  * Makefile: bump version
  * Re-order some of the help options
  * Fix --random option to create semaphore if semaphore is chosen by random

 -- Colin King <colin.king@canonical.com>  Sun, 26 Oct 2014 11:54:00 +0000

stress-ng (0.02.21-1) unstable; urgency=medium

  * Bump version again
  * Mixed up shared memory regions, fix these as --cache breaks

 -- Colin King <colin.king@canonical.com>  Fri, 24 Oct 2014 21:13:00 +0100

stress-ng (0.02.20-1) unstable; urgency=medium

  * Makefile: bump version again
  * Remove shm_* and replace with mmap'd shared memory (fix GNU hurd issues)

 -- Colin King <colin.king@canonical.com>  Fri, 24 Oct 2014 19:40:00 +0100

stress-ng (0.02.19-1) unstable; urgency=medium

  * Makefile: bump version
  * Don't enable stress-msg for GNU HURD
  * Make lock_mem_current a no-op for GNU HURD
  * Don't enable stress-sigq for GNU HURD
  * Need <sys/time.h> in stress-ng.h
  * Cater for systems where sem_init is not supported
  * shm_open on /tmp path (for kFreeBSD)
  * Fix non-linux build - don't build in options that are not available
  * sched.c: make this build on non-linux systems
  * io-proirity: make this more generic rather than linux specific
  * stress-nice: work around systems that lack RLIMIT_NICE
  * stress-mmap: fix kFreeBSD build failures, no MAP_POPULATE
  * kFreeBSD has no MAP_POPULATE
  * Update to latest policy standards
  * debian/control: update to keep in sync with new features

 -- Colin King <colin.king@canonical.com>  Fri, 24 Oct 2014 16:46:00 +0100

stress-ng (0.02.18-1) unstable; urgency=medium

  * Makefile: bump version, add copyright, change codename, fix make dist

 -- Colin King <colin.king@canonical.com>  Fri, 24 Oct 2014 09:24:00 +0100

stress-ng (0.02.17-1) unstable; urgency=medium

  * Makefile: bump version again
  * Break out of stress_run if we've timed out
  * Add more exit points to check for early abort
  * stress-vm: restart processes killed by OOM, add more exit checking
  * stress-bigheap: add more exit checking

 -- Colin King <colin.king@canonical.com>  Thu, 23 Oct 2014 17:38:00 +0100

stress-ng (0.02.16-1) unstable; urgency=medium

  * Makefile: bump version
  * Make sequential minimum 0
  * stress-fstat: free list on error return
  * Default to number of online cpus if --sequential 0 is used
  * Remove debug message

 -- Colin King <colin.king@canonical.com>  Thu, 23 Oct 2014 13:01:00 +0100

stress-ng (0.02.15-1) unstable; urgency=medium

  * Makefile: bump version
  * Add rdrand stressor (Intel Ivybridge+)
  * stress-fstat: don't exit(), just return on error
  * stress-fstat: don't exit(), just return on error
  * stress-rename: don't exit(), return on error
  * stress-utime: don't exit(), just return on failure
  * Add more explanations to man page
  * Spread --random stressors more evenly
  * Fix minor issues in man page

 -- Colin King <colin.king@canonical.com>  Thu, 23 Oct 2014 11:22:00 +0100

stress-ng (0.02.14-1) unstable; urgency=medium

  * Makefile: bump version
  * Compile in asm no-op hints only if using gcc
  * Make gcc optimisation hint a gcc only feature
  * Add verify mode to omega computation
  * Add verify mode to pi computation
  * Add verify mode on hanoi computation
  * Add verify mode to ln(2) computation
  * Add verify mode to psi computation
  * Add verify mode to phi computation and make it long double
  * Make nsqrt long double precision and add verify mode
  * Add verify on euler computation
  * Add verify on IDCT

 -- Colin King <colin.king@canonical.com>  Thu, 23 Oct 2014 00:45:00 +0100

stress-ng (0.02.13-1) unstable; urgency=medium

  * Makefile: bump version
  * Properly report child exit error status
  * mlock all pages down on so they don't get swapped out
  * Add feedback on file system clean up on SIGINT
  * Move ioprio_set out of stress-ng.h to io-priority.c
  * Fix table width in stress-cpu stressors
  * Add -ve value sanity checking
  * Add --sequential option

 -- Colin King <colin.king@canonical.com>  Wed, 22 Oct 2014 16:32:00 +0100

stress-ng (0.02.12-1) unstable; urgency=medium

  * Makefile: bump version
  * Reduce scope of variables
  * Add SIGFPE stressor --sigfpe --sigfpe-ops
  * Add --fork-max option
  * Move opt parsing to parse-opts.c
  * Remove unrequired headers from coredump
  * Re-organise code, move helper functions
  * Update man page on random cpu stressor

 -- Colin King <colin.king@canonical.com>  Tue, 21 Oct 2014 13:16:00 +0100

stress-ng (0.02.11-1) unstable; urgency=medium

  * Makefile: bump version
  * Add fstat check in fallocate verify path
  * Add verify to stress-yield
  * Add verify to stress-vm
  * Add verify to stress-poll
  * Add verify to stress-fork
  * Add verify to stress-fallocate
  * Add verify on stress cpu sqrt
  * Add verify to bigheap
  * Add verify to stress-affinity
  * Abort stressors after a threshold of failures reached
  * Add --bigheap-growth option
  * Clean up nice cpu consumer, add a little more info in manual about this
  * Add --nice and --nice-ops for nice stressor
  * Re-order some man page options
  * Fix printf format specifier

 -- Colin King <colin.king@canonical.com>  Sun, 19 Oct 2014 17:29:00 +0100

stress-ng (0.02.10-1) unstable; urgency=medium

  * Makefile: bump version
  * Make n ssize_t
  * Fix msg type field
  * Add --msg and --msg-ops System V msg send/receive stressor
  * Add --verify support to stress-pipe
  * Minor code cleanup
  * Print pid rather than status when printing failed stressor fork
  * Add verification of qsort
  * Add --verify example to manual
  * Add verify mode to integer cpu stressors
  * Enable OPT_FAIL for verify mode and all flags
  * Add MWC_SEED and MWC_SEED_W MWC_SEED_Z macros
  * Add mwc seeding helper
  * Use pr_fail on test verify failures
  * Add mmap memory verify
  * Minor comment fix
  * Add FAIL log state
  * Add --verify option

 -- Colin King <colin.king@canonical.com>  Thu, 16 Oct 2014 23:12:01 +0100

stress-ng (0.02.09-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile: add more smarts to detect header file and Makefile changes
  * Re-structure sources, break into per test and helper funcs sources

 -- Colin King <colin.king@canonical.com>  Mon, 13 Oct 2014 22:22:22 +0000

stress-ng (0.02.08-1) unstable; urgency=medium

  * Bump version
  * Add more sanity checking for numeric options
  * fflush output before we fork
  * Allow one to request number of stressors to match number of online CPUs
  * Fix up comment
  * Add hand optimised Hamming H(8,4) code cpu stressor

 -- Colin King <colin.king@canonical.com>  Sun, 12 Oct 2014 22:33:00 +0100

stress-ng (0.02.07-1) unstable; urgency=medium

  * Makefile: bump version
  * Add computation of the reciprocal Fibonacci constant psi
  * Add computation of the omega constant as a cpu stressor
  * Add computation of pi cpu stressor

 -- Colin King <colin.king@canonical.com>  Sat, 11 Oct 2014 20:07:00 +0100

stress-ng (0.02.06-1) unstable; urgency=medium

  * Makefile: bump version
  * Rename ctxt -> switch
  * Add metrics-brief example to man page
  * Add Towers of Hanoi CPU stessor
  * Add gray code cpu stressor
  * Add --metrics-brief option
  * Add brute force prime search
  * Add Sieve of Eratosthenes cpu stressor

 -- Colin King <colin.king@canonical.com>  Sat, 11 Oct 2014 11:33:00 +0100

stress-ng (0.02.05-1) unstable; urgency=medium

  * Makefile: bump version
  * Add correlation cpu stressor
  * Add Zeta function cpu stressor
  * Add more information in manual
  * Add hash pjw and make jenkin hash iterate more

 -- Colin King <colin.king@canonical.com>  Fri, 10 Oct 2014 16:26:00 +0100

stress-ng (0.02.04-1) unstable; urgency=medium

  * Makefile: bump version
  * Add hyperbolic function sinh cosh cpu stressor
  * Expand man page
  * Add CCITT CRC16 cpu stressor
  * Add compare + jmp cpu stressor
  * Add cpu explog stressor and tidy up man page
  * Add Ackermann function cpu stressor
  * Add log(2) computation for cpu stressor
  * Update man page
  * Add fibonacci cpu stressor, use register where appropriate

 -- Colin King <colin.king@canonical.com>  Thu, 9 Oct 2014 21:16:00 +0100

stress-ng (0.02.03-1) unstable; urgency=medium

  * Bump version
  * Add --fstat, --fstat-ops and --fstat-path fstat stress options
  * Add --utime, --utime-ops, --utime-fsync options
  * Add -R, --rename, --rename-ops rename stressor

 -- Colin King <colin.king@canonical.com>  Thu, 9 Oct 2014 11:03:00 +0100

stress-ng (0.02.02-1) unstable; urgency=medium

  * Makefile: bump version
  * bigheap: account for the type of out of memory conditions in debug
  * Forgot to update the man page for --big-heap options

 -- Colin King <colin.king@canonical.com>  Tue, 7 Oct 2014 13:23:00 +0100

stress-ng (0.02.01-1) unstable; urgency=medium

  * Fix up errors found by coverity scan
  * Add bigheap stressor
  * Makefile: bump version
  * Add coredumping limits
  * Add oom killer adjustments
  * Add maxtrix product cpu stressor
  * Expand float and int tests to various sized arithmetic

 -- Colin King <colin.king@canonical.com>  Tue, 7 Oct 2014 12:18:00 +0100

stress-ng (0.02.00-1) unstable; urgency=medium

  * Bump version to 0.02.00
  * Minor tweaks to man page
  * Add qsort stressor and --qsort, --qsort-ops, --qsort-size options
  * Remove some whitespace
  * Add some notes about the CPU methods used
  * Add RGV <-> YUV cpu stress method
  * Add more bithack stressors to bitops cpu method, update man page
  * Remove --int, --int-ops, --float, --float-ops from help
  * Re-order cpu stressor methods alphabetically
  * Remove the need for cpu stressors to return anything
  * Remove --float and --float-ops and merge into cpu stress
  * Make uint64_put take 1 arg
  * Remove --int and --int-ops, merge into int cpu stress
  * Remove extraneous space
  * Add comments and some consts
  * Add IDCT and "all" cpu stress methods
  * Add euler and jenkins cpu stress methods
  * Add Fast Fourier Transform cpu stress method
  * Add Golden Ratio computation as a cpu stressor
  * Execute the correct stress function
  * Fix indexing error on procs <---> stress id
  * Add --cpu-method option to stress the CPU different ways
  * Add const where applicable, small code tidy up
  * Replace APP_NAME with app_name static string
  * Guard against bad flag type
  * Re-work print, saved ~60 bytes
  * Sort stressors by name order
  * Get page size for mmap using sysconf
  * Make *_put helper args const
  * Make maximum number of procs a #defined constant
  * Track mmap'd memory, this stops coverity scan getting confused
  * Add --hdd-write-size option
  * Add mmap stressor and --mmap, --mmap-ops, mmap-bytes options
  * Fully #define out unused stress tests
  * Check for end-of-table on stressors
  * Use err and dbg helpers to print syscall failures
  * Make short get_opt short int
  * Remove human readable label field, it's duplication
  * Make short opts a stress_op enum
  * Make all ops lo, hi thresholds the same (100,100000000)
  * Make options table driven for stress test options
  * Add segmentation fault stressor, --sigsegv and --sigsegv-ops options
  * Add directory stressors
  * Add link and symlink stressors
  * Fix help information, start -> stop

 -- Colin King <colin.king@canonical.com>  Thu, 3 Oct 2014 10:44:00 +0100

stress-ng (0.01.32-1) unstable; urgency=medium

  * Makefile: bump version
  * Handle forced abort and tidy up when errors occur during start up
  * Add more termination checks to try to abort faster
  * Fix --sched option that had missing .TP
  * Remove duplicate const
  * Neaten up the see also list

 -- Colin King <colin.king@canonical.com>  Thu, 28 Aug 2014 00:21:01 +0100

stress-ng (0.01.31-1) unstable; urgency=medium

  * Makefile: bump version
  * Minor fix-ups in man page
  * Re-order globals, saves 8 bytes
  * Make mwc uint64_t
  * Add some more comments
  * Remove DIV_OPS_BY_PROCS macro
  * Fix --keep-name help info (order and missing ')
  * Fix --sched man page option

 -- Colin King <colin.king@canonical.com>  Tue, 19 Aug 2014 15:47:28 +0100

stress-ng (0.01.30-1) unstable; urgency=medium

  * Makefile: bump version
  * Fix up a few resource leaks
  * Add format length specifier to scanf on integers
  * Minor var cleanup from cppcheck
  * Re-work help info
  * Remove common functionality, make code smaller
  * Free procs more rigorously.
  * Clear sigqueue union, keeps valgrind happy
  * Free procs info at exit
  * Add more information in man page
  * Re-use stressor names in checks
  * Cast max_ops to (void) to avoid unused var warnings
  * Add --vm-locked option and force cpu affinity changes on cache stress
  * Fix spelling mistake in man page
  * Remove some extraneous white spaces
  * Remove commas from nunbers in help
  * Align help info
  * Remove redundant code that got accidentally left in
  * Simplify hogs message
  * Keep track of per stress test ops count in opt_ops array
  * Add -P, --poll, --poll-ops zero timeout polling stress test
  * Add -k, --keep-name option to not change name of stress processes
  * Add -r, --random option to create N random stress processes

 -- Colin King <colin.king@canonical.com>  Tue, 5 Aug 2014 17:25:01 +0100

stress-ng (0.01.29-1) unstable; urgency=medium

  * Makefile: bump version
  * Use si_value.sival_int instead of info.si_int (Closes: #756787)
  * Fix incorrect nesting of OPT_SIGQUEUE*

 -- Colin King <colin.king@canonical.com>  Fri, 1 Aug 2014 23:25:23 +0100

stress-ng (0.01.28-1) unstable; urgency=medium

  * Makefile: bump version, change codename
  * Add sigqueue and sigwaitinfo stress, new --sigq, --siqq-ops options
  * Make mwc inline
  * Make opt_do_run volatile
  * Make -O2 default
  * Remove numerous printfs in help info
  * Remove lots of duplicate stress test names from code
  * Fixup print % qualifier
  * Clean all objects on make clean

 -- Colin King <colin.king@canonical.com>  Wed, 30 Jul 2014 10:25:00 +0100

stress-ng (0.01.27-1) unstable; urgency=medium

  * Makefile: bump version
  * Add more info to man page
  * Add open stress test
  * Fix bug in semaphore range checking
  * Fix dbg message for stress_int
  * Add some more comments
  * Add more information in man page
  * Increase the -l option accuracy by biasing by the select() overhead time
  * Add missing comma to output

 -- Colin King <colin.king@canonical.com>  Tue, 29 Jul 2014 00:33:31 +0100

stress-ng (0.01.26-1) unstable; urgency=medium

  * Makefile: bump version
  * Add semaphore stress, --sem and --sem-ops options

 -- Colin King <colin.king@canonical.com>  Sun, 27 Jul 2014 16:24:22 +0100

stress-ng (0.01.25-1) unstable; urgency=medium

  * Makefile: bump version
  * More aggressive process termination to kill any lingering processes

 -- Colin King <colin.king@canonical.com>  Sun, 20 Jul 2014 18:05:01 +0100

stress-ng (0.01.24-1) unstable; urgency=medium

  * Makefile: bump version
  * Makefile: add helper.c to make dist
  * Add integer stressor, --int and --int-ops options
  * urandom: cater for non-linux builds
  * Add --float and --float-ops floatin point stressors
  * Add urandom stress, -u, --urandom and --urandom-ops options
  * Make timer stress more responsive to SIGINTs
  * Forgot to add 'T' option to getopt

 -- Colin King <colin.king@canonical.com>  Sun, 20 Jul 2014 17:38:43 +0100

stress-ng (0.01.23-1) unstable; urgency=medium

  * Makefile: bump version
  * Add snappier process termination
  * Add -h option
  * Add more debug on exit paths
  * Add more checking on sigaction
  * Minor code tidy up
  * Move time_now()
  * Use timeval helper in time_now()
  * Fix build error on GNU HURD

 -- Colin King <colin.king@canonical.com>  Mon, 14 Jul 2014 11:49:41 +0100

stress-ng (0.01.22-1) unstable; urgency=medium

  * Makefile: bump version
  * Add directory entry thrashing
  * Track ftruncate errors

 -- Colin King <colin.king@canonical.com>  Sun, 13 Jul 2014 17:19:05 +0100

stress-ng (0.01.21-1) unstable; urgency=medium

  * Makefile: bump version
  * Remove need for rand, it makes Coverity Scan complain
  * Check for freq divide by zero
  * Add in __linux__ build dependency on timers
  * Add timer stress test --timer, --timer-ops and --timer-freq options
  * Note that affinity options linux only in man page
  * opt_affinity_ops is linux only
  * Fix man page -F option
  * Add CPU affinity stress processes, add --affinity and --affinity-ops options

 -- Colin King <colin.king@canonical.com>  Sat, 12 Jul 2014 21:50:00 +0100

stress-ng (0.01.20-1) unstable; urgency=medium

  * Makefile: bump version
  * Ignore return from ftruncate, we don't care
  * Fix spelling mistakes
  * Standardise error messages
  * Remove extraneous pid at end of pr_* messages
  * Add more information when error occurs

 -- Colin King <colin.king@canonical.com>  Mon, 7 Jul 2014 20:00:00 +0100

stress-ng (0.01.19-1) unstable; urgency=medium

  * Makefile: bump version
  * Willfully ignore posix_fallocate() failures, we don't care
  * Terminate and tidy up flock stress temp file
  * Update help information
  * Make conditional stress tests no-ops rather than not including them
  * Add file locking stress, --flock and --flock-ops options
  * Add --vm-populate option
  * Add fallocate test and -F, --fallocate, --fallocate-ops options
  * Divide yield bogo ops by number of yield processes

 -- Colin King <colin.king@canonical.com>  Mon, 7 Jul 2014 19:26:00 +0100

stress-ng (0.01.18-1) unstable; urgency=medium

  * Makefile: bump version
  * Add yield stress test and -y, --yield, --yield-ops options
  * Add ionice-class and ionice-level options (Linux only)

 -- Colin King <colin.king@canonical.com>  Sun, 6 Jul 2014 11:14:00 +0100

stress-ng (0.01.17-1) unstable; urgency=medium

  * Makefile: update version
  * Add build hardening
  * Add scheduler options to man page
  * Allow --sched which to show available schedulers
  * Add --sched and --sched-prio options

 -- Colin King <colin.king@canonical.com>  Fri, 4 Jul 2014 16:38:00 +0100

stress-ng (0.01.16-1) unstable; urgency=medium

  * Don't include prctl.h unless compiled for a linux target
  * Reduce scope of j loop index
  * Reduce scope of ret
  * Clarify bitwise operation
  * Remove duplicate consts

 -- Colin King <colin.king@canonical.com>  Sat, 21 Jun 2014 14:24:15 +0100

stress-ng (0.01.15-1) unstable; urgency=medium

  * Initial Debian upload (Closes: #735674)
  * Makefile: bump version
  * Minor tidy-ups
  * Minor changes to man page

 -- Colin King <colin.king@canonical.com>  Mon, 26 May 2014 10:39:00 +0200

stress-ng (0.01.14-1) unstable; urgency=medium

  * Makefile: bump version
  * Add -a, -all run all stress test option
  * Cast close returns to (void) when we don't care
  * Minor comment and code clean up
  * Re-order options in man page
  * Add socket stressors
  * Add CPU cache to hogs line
  * Fix up and re-order options in help info

 -- Colin King <colin.king@canonical.com>  Thu, 22 May 2014 16:01:01 +0100

stress-ng (0.01.13-1) unstable; urgency=low

  * Makefile: bump version
  * Fill memory with something other that '0'
  * Add cache thrash stress options to man page
  * Add cache stress
  * Update man page with new pipe I/O options
  * Add pipe I/O loading test

 -- Colin King <colin.king@canonical.com>  Tue, 20 May 2014 12:14:00 +0100

stress-ng (0.01.12-1) unstable; urgency=low

  * Makefile: bump version
  * Add some more comments
  * Remove atoi and use strtol to handle underflow/overflow checking
  * Add print format specifier
  * Fix status not being printed

 -- Colin King <colin.king@canonical.com>  Mon, 19 May 2014 10:40:00 +0100

stress-ng (0.01.11-1) unstable; urgency=low

  * Makefile: bump version
  * Fix copyright
  * Makefile: Fix make dist, use plain old tar to omit debian contents
  * Add COPYING file
  * Add a -l --cpu-load option to load CPUs to a specified amount

 -- Colin King <colin.king@canonical.com>  Fri, 28 Mar 2014 21:08:11 +0000

stress-ng (0.01.10-1) unstable; urgency=low

  * Makefile: bump version
  * debian/control: set arch to any
  * Fix up copyright company
  * Fix formatting of the copyright in the source
  * Re-write the description and make it a little clearer in the source
  * Detect and report if a worker stress process failed
  * Make process name changing linux only feature

 -- Colin King <colin.king@canonical.com>  Mon, 20 Jan 2014 17:00:01 +0000

stress-ng (0.01.09-1) unstable; urgency=low

  * Initial release into Debian (Closes: #735674)
  * Makefile: bump version
  * Fix up description once more
  * Add some minimal comments
  * Re-work debian control again.

 -- Colin King <colin.king@canonical.com>  Fri, 17 Jan 2014 11:52:13 +0000

stress-ng (0.01.08-1) unstable; urgency=low

  * Makefile: bump version
  * debian/control: Update debian control
  * debian/rules, remove override_dh_auto_build
  * debian/control: update, minor changes
  * debian/compat: update to 9
  * Check for write fail

 -- Colin King <colin.king@canonical.com>  Thu, 16 Jan 2014 13:47:11 +0000

stress-ng (0.01.07) trusty; urgency=low

  * Makefile: bump version
  * Fix typo in help info
  * Ensure we quit when ctxt switch parent is killed
  * Update man page date
  * Add context switch stress test
  * Add fork stress test
  * Update copyright year

 -- Colin King <colin.king@canonical.com>  Thu, 16 Jan 2014 13:27:51 +0000

stress-ng (0.01.06) trusty; urgency=low

  * Makefile: bump version again
  * vm-keep does not have an optarg

 -- Colin King <colin.king@canonical.com>  Fri, 6 Dec 2013 18:46:20 +0000

stress-ng (0.01.05) trusty; urgency=low

  * Makefile: bump version
  * Fix opt_vm_hang bug

 -- Colin King <colin.king@canonical.com>  Fri, 6 Dec 2013 15:50:01 +0000

stress-ng (0.01.04) trusty; urgency=low

  * Makefile: bump version
  * ensure ret is initialized in print()
  * Fix some signed / unsinged comparison warnings
  * Make print return number of chars emitted and ignore some func returns
  * Makefile: add -Wextra
  * Set shm mem name to be unique on parent pid
  * handle out of memory error on procs
  * tidy up and constify where applicable

 -- Colin King <colin.king@canonical.com>  Tue, 19 Nov 2013 12:57:22 +0000

stress-ng (0.01.03) saucy; urgency=low

  * Makefile: bump version
  * Make mmap failure non fatal

 -- Colin King <colin.king@canonical.com>  Fri, 17 Oct 2013 19:38:31 +0100

stress-ng (0.01.02) saucy; urgency=low

  * Makefile: bump version
  * Set umask before using mkstemp

 -- Colin King <colin.king@canonical.com>  Wed, 15 Oct 2013 15:28:33 +0100

stress-ng (0.01.01) saucy; urgency=low

  * Makefile: bump version
  * hdd: fix --hdd-noclean option
  * hdd: change buffer size, exit early if hdd-ops reached per write
  * Add default settings as #defines
  * Make metrics labels a little more understandable
  * Limit vm-ops to min of 100

 -- Colin King <colin.king@canonical.com>  Tue, 15 Oct 2013 16:20:05 +0100

stress-ng (0.01.00) saucy; urgency=low

  * Initial version

 -- Colin King <colin.king@canonical.com>  Tue, 15 Oct 2013 13:35:40 +0100

