--- minisapserver-0.3.6.orig/debian/README.Debian
+++ minisapserver-0.3.6/debian/README.Debian
@@ -0,0 +1,4 @@
+minisapserver for Debian
+------------------------
+
+ -- Antonin Kral <A.Kral@sh.cvut.cz>  Tue, 25 Nov 2008 07:19:53 +0100
--- minisapserver-0.3.6.orig/debian/changelog
+++ minisapserver-0.3.6/debian/changelog
@@ -0,0 +1,32 @@
+minisapserver (0.3.6-1.1b1) staging; urgency=high
+
+  * No-change rebuild against libstdc++6
+
+ -- Philip Muškovac <yofel@kubuntu.org>  Fri, 28 Aug 2015 07:43:11 +0000
+
+minisapserver (0.3.6-1.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Use dh-autoreconf in build to support new architectures (Closes: #727459)
+
+ -- Chen Baozi <baozich@gmail.com>  Fri, 06 Jun 2014 17:33:01 +0800
+
+minisapserver (0.3.6-1) unstable; urgency=low
+
+  * New upstream release
+  * Switched from 'dh_clean -k' to 'dh_prep'
+
+ -- Antonin Kral <A.Kral@sh.cvut.cz>  Wed, 06 Jan 2010 08:20:01 +0100
+
+minisapserver (0.3.5-2) unstable; urgency=low
+
+  * Extended description (Closes: #506837)
+
+ -- Antonin Kral <A.Kral@sh.cvut.cz>  Wed, 26 Nov 2008 21:07:24 +0100
+
+minisapserver (0.3.5-1) unstable; urgency=low
+
+  * Initial release (Closes: #506837)
+
+ -- Antonin Kral <A.Kral@sh.cvut.cz>  Tue, 25 Nov 2008 07:19:53 +0100
+
--- minisapserver-0.3.6.orig/debian/compat
+++ minisapserver-0.3.6/debian/compat
@@ -0,0 +1 @@
+7
--- minisapserver-0.3.6.orig/debian/control
+++ minisapserver-0.3.6/debian/control
@@ -0,0 +1,18 @@
+Source: minisapserver
+Section: net
+Priority: extra
+Maintainer: Antonin Kral <A.Kral@sh.cvut.cz>
+Build-Depends: debhelper (>= 7), autotools-dev, dh-autoreconf
+Standards-Version: 3.8.3
+Homepage: http://www.videolan.org
+
+Package: minisapserver
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Mini SAP Server
+ Mini SAP Server from VideoLan project is a small standalone application that
+ can produce Session Announcement Protocol (SAP) announcements in Session
+ Description Protocol (SDP) format. SAP is  described in RFC2974. SDP in
+ RFC4566.
+ .
+ This is a mini-sap-server from VideoOnLan project.
--- minisapserver-0.3.6.orig/debian/copyright
+++ minisapserver-0.3.6/debian/copyright
@@ -0,0 +1,23 @@
+This package was debianized by Antonin Kral <A.Kral@sh.cvut.cz> on
+Tue, 25 Nov 2008 07:19:53 +0100.
+
+It was downloaded from http://www.videolan.org
+
+Upstream Authors:
+
+    Arnaud Schauly <gitan@via.ecp.fr>
+    Clment Stenac <zorglub@via.ecp.fr>
+    Damien Lucas <nitrox@videolan.org>
+    Rmi Denis-Courmont <rem # videolan.org>
+
+
+Copyright:
+
+    Copyright (C) 1998-2004 VideoLAN
+
+License:
+
+    GPL (see /usr/share/common-licenses/GPL)
+
+The Debian packaging is (C) 2008, Antonin Kral <A.Kral@sh.cvut.cz> and
+is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
--- minisapserver-0.3.6.orig/debian/dirs
+++ minisapserver-0.3.6/debian/dirs
@@ -0,0 +1 @@
+usr/bin
--- minisapserver-0.3.6.orig/debian/docs
+++ minisapserver-0.3.6/debian/docs
@@ -0,0 +1,2 @@
+NEWS
+README
--- minisapserver-0.3.6.orig/debian/init.d
+++ minisapserver-0.3.6/debian/init.d
@@ -0,0 +1,294 @@
+#!/bin/sh
+#
+# Example init.d script with LSB support.
+#
+# Please read this init.d carefully and modify the sections to
+# adjust it to the program you want to run.
+#
+# Copyright (c) 2007 Javier Fernandez-Sanguino <jfs@debian.org>
+#
+# This is free software; you may redistribute it and/or modify
+# it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2,
+# or (at your option) any later version.
+#
+# This is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License with
+# the Debian operating system, in /usr/share/common-licenses/GPL;  if
+# not, write to the Free Software Foundation, Inc., 59 Temple Place,
+# Suite 330, Boston, MA 02111-1307 USA
+#
+### BEGIN INIT INFO
+# Provides:          minisapserver
+# Required-Start:    $network $local_fs
+# Required-Stop:
+# Should-Start:
+# Should-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Mini SAP server
+# Description:       Daemon for sending SAP announcements
+### END INIT INFO
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+DAEMON=/usr/bin/sapserver
+NAME=minisapserver
+DESC=minisapserver
+LOGDIR=/var/log
+DAEMONUSER=daemon
+
+PIDFILE=/var/run/$NAME.pid
+
+test -x $DAEMON || exit 0
+
+. /lib/lsb/init-functions
+
+# Default options, these can be overriden by the information
+# at /etc/default/$NAME
+DAEMON_OPTS=""          # Additional options given to the server
+
+DIETIME=10              # Time to wait for the server to die, in seconds
+                        # If this value is set too low you might not
+                        # let some servers to die gracefully and
+                        # 'restart' will not work
+
+#STARTTIME=2             # Time to wait for the server to start, in seconds
+                        # If this value is set each time the server is
+                        # started (on start or restart) the script will
+                        # stall to try to determine if it is running
+                        # If it is not set and the server takes time
+                        # to setup a pid file the log message might 
+                        # be a false positive (says it did not start
+                        # when it actually did)
+                        
+LOGFILE=$LOGDIR/$NAME.log  # Server logfile
+#DAEMONUSER=minisapserver   # Users to run the daemons as. If this value
+                        # is set start-stop-daemon will chuid the server
+
+# Include defaults if available
+if [ -f /etc/default/$NAME ] ; then
+	. /etc/default/$NAME
+fi
+
+if [ "x$RUN" != "xyes" ] ; then
+    log_failure_msg "$NAME disabled, please adjust the configuration to your needs "
+    log_failure_msg "and then set RUN to 'yes' in /etc/default/$NAME to enable it."
+    exit 0
+fi
+
+# Check that the user exists (if we set a user)
+# Does the user exist?
+if [ -n "$DAEMONUSER" ] ; then
+    if getent passwd | grep -q "^$DAEMONUSER:"; then
+        # Obtain the uid and gid
+        DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'`
+        DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'`
+    else
+        log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
+        exit 1
+    fi
+fi
+
+
+set -e
+
+running_pid() {
+# Check if a given process pid's cmdline matches a given name
+    pid=$1
+    name=$2
+    [ -z "$pid" ] && return 1
+    [ ! -d /proc/$pid ] &&  return 1
+    cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
+    # Is this the expected server
+    [ "$cmd" != "$name" ] &&  return 1
+    return 0
+}
+
+running() {
+# Check if the process is running looking at /proc
+# (works for all users)
+
+    # No pidfile, probably no daemon present
+    [ ! -f "$PIDFILE" ] && return 1
+    pid=`cat $PIDFILE`
+    running_pid $pid $DAEMON || return 1
+    return 0
+}
+
+start_server() {
+# Start the process using the wrapper
+        if [ -z "$DAEMONUSER" ] ; then
+            start-stop-daemon --start --quiet --pidfile $PIDFILE \
+                        --make-pidfile --background \
+                        --exec $DAEMON -- $DAEMON_OPTS
+            errcode=$?
+        else
+            start-stop-daemon --start --quiet --pidfile $PIDFILE \
+                        --chuid $DAEMONUSER --make-pidfile --background \
+                        --exec $DAEMON -- $DAEMON_OPTS
+            errcode=$?
+        fi
+	return $errcode
+}
+
+stop_server() {
+# Stop the process using the wrapper
+        if [ -z "$DAEMONUSER" ] ; then
+            killproc -p $PIDFILE $DAEMON
+            errcode=$?
+        else
+# if we are using a daemonuser then look for process that match
+            start-stop-daemon --stop --quiet --pidfile $PIDFILE \
+                        --user $DAEMONUSER \
+                        --exec $DAEMON
+            errcode=$?
+        fi
+
+	return $errcode
+}
+
+reload_server() {
+    [ ! -f "$PIDFILE" ] && return 1
+    pid=pidofproc $PIDFILE # This is the daemon's pid
+    # Send a SIGHUP
+    kill -1 $pid
+    return $?
+}
+
+force_stop() {
+# Force the process to die killing it manually
+	[ ! -e "$PIDFILE" ] && return
+	if running ; then
+		kill -15 $pid
+	# Is it really dead?
+		sleep "$DIETIME"s
+		if running ; then
+			kill -9 $pid
+			sleep "$DIETIME"s
+			if running ; then
+				echo "Cannot kill $NAME (pid=$pid)!"
+				exit 1
+			fi
+		fi
+	fi
+	rm -f $PIDFILE
+}
+
+
+case "$1" in
+  start)
+	log_daemon_msg "Starting $DESC " "$NAME"
+        # Check if it's running first
+        if running ;  then
+            log_progress_msg "apparently already running"
+            log_end_msg 0
+            exit 0
+        fi
+        if start_server ; then
+            # NOTE: Some servers might die some time after they start,
+            # this code will detect this issue if STARTTIME is set
+            # to a reasonable value
+            [ -n "$STARTTIME" ] && sleep $STARTTIME # Wait some time 
+            if  running ;  then
+                # It's ok, the server started and is running
+                log_end_msg 0
+            else
+                # It is not running after we did start
+                log_end_msg 1
+            fi
+        else
+            # Either we could not start it
+            log_end_msg 1
+        fi
+	;;
+  stop)
+        log_daemon_msg "Stopping $DESC" "$NAME"
+        if running ; then
+            # Only stop the server if we see it running
+			errcode=0
+            stop_server || errcode=$?
+            log_end_msg $errcode
+        else
+            # If it's not running don't do anything
+            log_progress_msg "apparently not running"
+            log_end_msg 0
+            exit 0
+        fi
+        ;;
+  force-stop)
+        # First try to stop gracefully the program
+        $0 stop
+        if running; then
+            # If it's still running try to kill it more forcefully
+            log_daemon_msg "Stopping (force) $DESC" "$NAME"
+			errcode=0
+            force_stop || errcode=$?
+            log_end_msg $errcode
+        fi
+	;;
+  restart|force-reload)
+        log_daemon_msg "Restarting $DESC" "$NAME"
+		errcode=0
+        stop_server || errcode=$?
+        # Wait some sensible amount, some server need this
+        [ -n "$DIETIME" ] && sleep $DIETIME
+        start_server || errcode=$?
+        [ -n "$STARTTIME" ] && sleep $STARTTIME
+        running || errcode=$?
+        log_end_msg $errcode
+	;;
+  status)
+
+        log_daemon_msg "Checking status of $DESC" "$NAME"
+        if running ;  then
+            log_progress_msg "running"
+            log_end_msg 0
+        else
+            log_progress_msg "apparently not running"
+            log_end_msg 1
+            exit 1
+        fi
+        ;;
+  # Use this if the daemon cannot reload
+  reload)
+        log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon"
+        log_warning_msg "cannot re-read the config file (use restart)."
+        ;;
+  # And this if it cann
+  #reload)
+          #
+          # If the daemon can reload its config files on the fly
+          # for example by sending it SIGHUP, do it here.
+          #
+          # If the daemon responds to changes in its config file
+          # directly anyway, make this a do-nothing entry.
+          #
+          # log_daemon_msg "Reloading $DESC configuration files" "$NAME"
+          # if running ; then
+          #    reload_server
+          #    if ! running ;  then
+          # Process died after we tried to reload
+          #       log_progress_msg "died on reload"
+          #       log_end_msg 1
+          #       exit 1
+          #    fi
+          # else
+          #    log_progress_msg "server is not running"
+          #    log_end_msg 1
+          #    exit 1
+          # fi
+                                                                                    #;;
+
+  *)
+	N=/etc/init.d/$NAME
+	echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2
+	exit 1
+	;;
+esac
+
+exit 0
--- minisapserver-0.3.6.orig/debian/minisapserver.default
+++ minisapserver-0.3.6/debian/minisapserver.default
@@ -0,0 +1,13 @@
+# Defaults for minisapserver initscript
+# sourced by /etc/init.d/minisapserver
+# installed at /etc/default/minisapserver by the maintainer scripts
+
+#
+# This is a POSIX shell fragment
+#
+
+# Additional options that are passed to the Daemon.
+DAEMON_OPTS=""
+
+# Change to "yes" when want to start daemon after boot
+RUN="no"
--- minisapserver-0.3.6.orig/debian/rules
+++ minisapserver-0.3.6/debian/rules
@@ -0,0 +1,107 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE))
+CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
+else
+CROSS= --build $(DEB_BUILD_GNU_TYPE)
+endif
+
+
+
+config.status: configure
+	dh_testdir
+	# Add here commands to configure the package.
+ifneq "$(wildcard /usr/share/misc/config.sub)" ""
+	cp -f /usr/share/misc/config.sub config.sub
+endif
+ifneq "$(wildcard /usr/share/misc/config.guess)" ""
+	cp -f /usr/share/misc/config.guess config.guess
+endif
+	dh_autoreconf
+	./configure $(CROSS) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --sysconfdir=/etc CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs"
+
+
+build: build-stamp
+
+build-stamp:  config.status 
+	dh_testdir
+
+	# Add here commands to compile the package.
+	$(MAKE)
+	#docbook-to-man debian/minisapserver.sgml > minisapserver.1
+
+	touch $@
+
+clean: 
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp 
+
+	# Add here commands to clean up after the build process.
+	[ ! -f Makefile ] || $(MAKE) distclean
+	rm -f config.sub config.guess
+
+	dh_autoreconf_clean
+	dh_clean 
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_prep
+	dh_installdirs
+
+	# Add here commands to install the package into debian/minisapserver.
+	$(MAKE) DESTDIR=$(CURDIR)/debian/minisapserver install
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs ChangeLog
+	dh_installdocs
+	dh_installexamples
+#	dh_install
+#	dh_installmenu
+#	dh_installdebconf	
+#	dh_installlogrotate
+#	dh_installemacsen
+#	dh_installpam
+#	dh_installmime
+#	dh_python
+	dh_installinit
+#	dh_installcron
+#	dh_installinfo
+	dh_installman
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+#	dh_perl
+#	dh_makeshlibs
+	dh_installdeb
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install 
--- minisapserver-0.3.6.orig/debian/watch
+++ minisapserver-0.3.6/debian/watch
@@ -0,0 +1,10 @@
+# Example watch control file for uscan
+# Rename this file to "watch" and then you can run the "uscan" command
+# to check for upstream updates and more.
+# See uscan(1) for format
+
+# Compulsory line, this is a version 3 file
+version=3
+
+http://download.videolan.org/pub/videolan/miniSAPserver/(\d+\.\d+\.\d+).*
+
