TOP(1)

NAME
top - display Linux processes

SYNOPSIS
top -hv|-bcHiSs -d delay -n limit -u|U user -p pid[,pid] -w [cols] The traditional switches '-' and whitespace are optional.

DESCRIPTION
The top program provides a dynamic real-time view of a running system. It can display system summary information as well as a list of processes or threads currently being managed by the Linux kernel. The types of system summary information shown and the types, order and size of information displayed for processes are all user configurable and that configuration can be made persistent across restarts. The program provides a limited interactive interface for process manipulation as well as a much more extensive interface for personal configuration -- encompassing every aspect of its operation. And while top is referred to throughout this document, you are free to name the program anything you wish. That new name, possibly an alias, will then be reflected on top's display and used when reading and writing a configuration file.

OVERVIEW

  Documentation
The remaining Table of Contents
    1. COMMAND-LINE Options
    2. SUMMARY Display
       a. UPTIME and LOAD Averages
       b. TASK and CPU States
       c. MEMORY Usage
    3. FIELDS / Columns Display
       a. DESCRIPTIONS of Fields
       b. MANAGING Fields
    4. INTERACTIVE Commands
       a. GLOBAL Commands
       b. SUMMARY AREA Commands
       c. TASK AREA Commands
          1. Appearance
          2. Content
          3. Size
          4. Sorting
       d. COLOR Mapping
    5. ALTERNATE-DISPLAY Provisions
       a. WINDOWS Overview
       b. COMMANDS for Windows
       c. SCROLLING a Window
       d. SEARCHING in a Window
    6. FILES
       a. SYSTEM Configuration File
       b. PERSONAL Configuration File
    7. STUPID TRICKS Sampler
       a. Kernel Magic
       b. Bouncing Windows
       c. The Big Bird Window
       d. The Ol' Switcheroo
    8. BUGS, 9. HISTORY Former top, 10. AUTHOR, 11. SEE Also

  Operation
When operating top, the two most important keys are the help ('h' or '?') key and quit ('q') key. Alternatively, you could simply use the traditional interrupt key ('^C') when you're done. Some of top's screens or functions require the use of cursor motion keys like the standard arrow keys plus the Home, End, PgUp and PgDn keys. If your terminal or emulator does not provide those keys, the following keys are accepted as alternatives:
       key equivalent-key-combinations
       Up alt + \ or alt + k
       Down alt + / or alt + j
       Left alt + < or alt + h
       Right alt + > or alt + l (lower case L)
       PgUp alt + Up or alt + ctrl + k
       PgDn alt + Down or alt + ctrl + j
       Home alt + Left or alt + ctrl + h
       End alt + Right or alt + ctrl + l When you start top for the first time, you'll be presented with these traditional screen elements: 1) Summary Area; 2) Fields/Columns Header; 3) Task Area. These areas will be explored in the sections that follow. There is also an Input/Message line between the Summary Area and Columns Header which needs no further explanation. Note: the width of top's display will be limited to 512 positions. Displaying all fields requires approximately 250 characters. Remaining screen width is usually allocated to any variable width columns currently visible. The variable width columns, such as COMMAND, are noted in topic 3a. DESCRIPTIONS of Fields. Actual output width may also be influenced by the -w switch, which is discussed in topic 1. COMMAND-LINE Options.

  Startup Defaults
The following startup defaults assume no configuration file, thus no user customizations. Even so, items shown with an asterisk ('*') could be overridden through the command-line. All are explained in detail in the sections that follow.
    Global-defaults
       'A' - Alt display Off (full-screen)
     * 'd' - Delay time 3.0 seconds
     * 'H' - Threads mode Off (summarize as tasks)
       'I' - Irix mode On (no, 'solaris' smp)
     * 'p' - PID monitoring Off (show all processes)
     * 's' - Secure mode Off (unsecured)
       'B' - Bold enable On (yes, bold globally)
    Summary-Area-defaults
       'l' - Load Avg/Uptime On (thus program name)
       't' - Task/Cpu states On (1+1 lines, see '1')
       'm' - Mem/Swap usage On (2 lines worth)
       '1' - Single Cpu On (thus 1 line if smp)
    Task-Area-defaults
       'b' - Bold hilite On (not 'reverse')
     * 'c' - Command line Off (name, not cmdline)
     * 'i' - Idle tasks On (show all tasks)
       'J' - Num align right On (not left justify)
       'j' - Str align right Off (not right justify)
       'R' - Reverse sort On (pids high-to-low)
     * 'S' - Cumulative time Off (no, dead children)
     * 'u' - User filter Off (show euid only)
     * 'U' - User filter Off (show any uid)
       'x' - Column hilite Off (no, sort field)
       'y' - Row hilite On (yes, running tasks)
       'z' - color/mono Off (no, colors)

1. COMMAND-LINE Options
The command-line syntax for top consists of:
  -hv|-bcHiSs -d delay -n limit -u|U user -p pid[,pid] -w [cols] The typically mandatory switches ('-') and even whitespace are completely optional.

-h | -v : Help/Version
    Show library version and the usage prompt, then quit.

-b : Batch-mode operation
    Starts top in 'Batch' mode, which could be useful for sending output from top to other programs or to a file. In this mode, top will not accept input and runs until the iterations limit you've set with the '-n' command-line option or until killed.

-c : Command-line/Program-name toggle
    Starts top with the last remembered 'c' state reversed. Thus, if top was displaying command lines, now that field will show program names, and visa versa. See the 'c' interactive command for additional information.

-d : Delay-time interval as:  -d ss.tt (secs.tenths)
    Specifies the delay between screen updates, and overrides the corresponding value in one's personal configuration file or the startup default. Later this can be changed with the 'd' or 's' interactive commands. Fractional seconds are honored, but a negative number is not allowed. In all cases, however, such changes are prohibited if top is running in 'Secure mode', except for root (unless the 's' command-line option was used). For additional information on 'Secure mode' see topic 6a. SYSTEM Configuration File.

-H : Threads-mode operation
    Instructs top to display individual threads. Without this command-line option a summation of all threads in each process is shown. Later this can be changed with the 'H' interactive command.

-i : Idle-process toggle
    Starts top with the last remembered 'i' state reversed. When this toggle is Off, tasks that have not used any CPU since the last update will not be displayed. For additional information regarding this toggle see topic 4c. TASK AREA Commands, SIZE.

-n : Number-of-iterations limit as:  -n number
    Specifies the maximum number of iterations, or frames, top should produce before ending.

-p : Monitor-PIDs mode as:  -pN1 -pN2 ...  or  -pN1,N2,N3 ...
    Monitor only processes with specified process IDs. This option can be given up to 20 times, or you can provide a comma delimited list with up to 20 pids. Co-mingling both approaches is permitted. A pid value of zero will be treated as the process id of the top program itself once it is running. This is a command-line option only and should you wish to return to normal operation, it is not necessary to quit and and restart top -- just issue any of these interactive commands: '=', 'u' or 'U'. The 'p', 'u' and 'U' command-line options are mutually exclusive.

-s : Secure-mode operation
    Starts top with secure mode forced, even for root. This mode is far better controlled through the system configuration file (see topic 6. FILES).

-S : Cumulative-time toggle
    Starts top with the last remembered 'S' state reversed. When 'Cumulative time' mode is On, each process is listed with the cpu time that it and its dead children have used. See the 'S' interactive command for additional information regarding this mode.

-u | -U : User-filter-mode as:  -u | -U number or name
    Display only processes with a user id or user name matching that given. The '-u' option matches on effective user whereas the '-U' option matches on any user (real, effective, saved, or filesystem). The 'p', 'u' and 'U' command-line options are mutually exclusive.

-w : Output-width-override as:  -w [ number ]
    In 'Batch' mode, when used without an argument top will format output using the COLUMNS= and LINES= environment variables, if set. Otherwise, width will be fixed at the maximum 512 columns. With an argument, output width can be decreased or increased (up to 512) but the number of rows is considered unlimited. In normal display mode, when used without an argument top will attempt to format output using the COLUMNS= and LINES= environment variables, if set. With an argument, output width can only be decreased, not increased. Whether using environment variables or an argument with -w, when not in 'Batch' mode actual terminal dimensions can never be exceeded. Note: Without the use of this command-line option, output width is always based on the terminal at which top was invoked whether or not in 'Batch' mode.

2. SUMMARY Display
Each of the following three areas are individually controlled through one or more interactive commands. See topic 4b. SUMMARY AREA Commands for additional information regarding these provisions.

  2a. UPTIME and LOAD Averages
This portion consists of a single line containing:
    program or window name, depending on display mode
    current time and length of time since last boot
    total number of users
    system load avg over the last 1, 5 and 15 minutes

  2b. TASK and CPU States
This portion consists of a minimum of two lines. In an SMP environment, additional lines can reflect individual CPU state percentages. Line 1 shows total tasks or threads, depending on the state of the Threads-mode toggle. That total is further classified as:
    running; sleeping; stopped; zombie Line 2 shows CPU state percentages based on the interval since the last refresh. Where two labels are shown below, those for more recent kernel versions are shown first.
    us, user : time running un-niced user processes
    sy, system : time running kernel processes
    ni, nice : time running niced user processes
    wa, IO-wait : time waiting for I/O completion
    hi : time spent servicing hardware interrupts
    si : time spent servicing software interrupts
    st : time stolen from this vm by the hypervisor

  2c. MEMORY Usage
This portion consists of two lines which may express values in kibibytes (KiB), mebibytes (MiB) or gibibytes (GiB) depending on the amount of currently installed physical memory. Line 1 reflects physical memory, classified as:
    total, used, free, buffers Line 2 reflects virtual memory, classified as:
    total, used, free, cached

3. FIELDS / Columns

  3a. DESCRIPTIONS of Fields
Listed below are top's available process fields (columns). They are shown in strict ascii alphabetical order. You may customize their position and whether or not they are displayable with the 'f' or 'F' (Fields Management) interactive commands. Any field is selectable as the sort field, and you control whether they are sorted high-to-low or low-to-high. For additional information on sort provisions see topic 4c. TASK AREA Commands, SORTING.

1. %CPU  --  CPU Usage
    The task's share of the elapsed CPU time since the last screen update, expressed as a percentage of total CPU time. In a true SMP environment, if 'Irix mode' is Off, top will operate in 'Solaris mode' where a task's cpu usage will be divided by the total number of CPUs. You toggle 'Irix/Solaris' modes with the 'I' interactive command.

2. %MEM  --  Memory Usage (RES)
    A task's currently used share of available physical memory.

3. CGROUPS  --  Control Groups
    The names of the control group(s) to which a process belongs, or '-' if not applicable for that process. Control Groups provide for allocating resources (cpu, memory, network bandwidth, etc.) among installation-defined groups of processes. They enable fine-grained control over allocating, denying, prioritizing, managing and monitoring those resources. Many different hierarchies of cgroups can exist simultaneously on a system and each hierarchy is attached to one or more subsystems. A subsystem represents a single resource. Note: The 'CGROUPS' field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum 512 characters). Even so, such variable width fields could still suffer truncation. See topic 5c. SCROLLING a Window for additional information on accessing any truncated data.

4. CODE  --  Code Size (KiB)
    The amount of physical memory devoted to executable code, also known as the 'text resident set' size or TRS.

5. COMMAND  --  Command Name or Command Line
    Display the command line used to start a task or the name of the associated program. You toggle between command line and name with 'c', which is both a command-line option and an interactive command. When you've chosen to display command lines, processes without a command line (like kernel threads) will be shown with only the program name in brackets, as in this example:
        [kthreadd] This field may also be impacted by the 'forest view' display mode. See the 'V' interactive command for additional information regarding that mode. Note: The 'COMMAND' field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum 512 characters). Even so, such variable width fields could still suffer truncation. This is especially true for this field when command lines are being displayed (the 'c' interactive command.) See topic 5c. SCROLLING a Window for additional information on accessing any truncated data.

6. DATA  --  Data + Stack Size (KiB)
    The amount of physical memory devoted to other than executable code, also known as the 'data resident set' size or DRS.

7. ENVIRON  --  Environment variables
    Display all of the environment variables, if any, as seen by the respective processes. These variables will be displayed in their raw native order, not the sorted order you are accustomed to seeing with an unqualified 'set'. Note: The 'ENVIRON' field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum 512 characters). Even so, such variable width fields could still suffer truncation. This is especially true for this field. See topic 5c. SCROLLING a Window for additional information on accessing any truncated data.

8. Flags  --  Task Flags
    This column represents the task's current scheduling flags which are expressed in hexadecimal notation and with zeros suppressed. These flags are officially documented in <linux/sched.h>.

9. GID  --  Group Id
    The effective group ID.

10. GROUP  --  Group Name
    The effective group name.

11. NI  --  Nice Value
    The nice value of the task. A negative nice value means higher priority, whereas a positive nice value means lower priority. Zero in this field simply means priority will not be adjusted in determining a task's dispatch-ability.

12. P  --  Last used CPU (SMP)
    A number representing the last used processor. In a true SMP environment this will likely change frequently since the kernel intentionally uses weak affinity. Also, the very act of running top may break this weak affinity and cause more processes to change CPUs more often (because of the extra demand for cpu time).

13. PGRP  --  Process Group Id
    Every process is member of a unique process group which is used for distribution of signals and by terminals to arbitrate requests for their input and output. When a process is created (forked), it becomes a member of the process group of its parent. By convention, this value equals the process ID (see PID) of the first member of a process group, called the process group leader.

14. PID  --  Process Id
    The task's unique process ID, which periodically wraps, though never restarting at zero. In kernel terms, it is a dispatchable entity defined by a 'task_struct'. This value may also be used as: a process group ID (see PGRP); a session ID for the session leader (see SID); a thread group ID for the thread group leader (see TGID); and a TTY process group ID for the process group leader (see TPGID).

15. PPID  --  Parent Process Id
    The process ID (pid) of a task's parent.

16. PR  --  Priority
    The scheduling priority of the task. If you see 'rt' in this field, it means the task is running under 'real time' scheduling priority. Under linux, real time priority is somewhat misleading since traditionally the operating itself was not preemptable. And while the 2.6 kernel can be made mostly preemptable, it is not always so.

17. RES  --  Resident Memory Size (KiB)
    The non-swapped physical memory a task has used.

18. RUID  --  Real User Id
    The real user ID.

19. RUSER  --  Real User Name
    The real user name.

20. S  --  Process Status
    The status of the task which can be one of:
        'D' = uninterruptible sleep
        'R' = running
        'S' = sleeping
        'T' = traced or stopped
        'Z' = zombie Tasks shown as running should be more properly thought of as 'ready to run' -- their task_struct is simply represented on the Linux run-queue. Even without a true SMP machine, you may see numerous tasks in this state depending on top's delay interval and nice value.

21. SHR  --  Shared Memory Size (KiB)
    The amount of shared memory available to a task, not all of which is typically resident. It simply reflects memory that could be potentially shared with other processes.

22. SID  --  Session Id
    A session is a collection of process groups (see PGRP), usually established by the login shell. A newly forked process joins the session of its creator. By convention, this value equals the process ID (see PID) of the first member of the session, called the session leader, which is usually the login shell.

23. SUID  --  Saved User Id
    The saved user ID.

24. SUPGIDS  --  Supplementary Group IDs
    The IDs of any supplementary group(s) established at login or inherited from a task's parent. They are displayed in a comma delimited list. Note: The 'SUPGIDS' field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum 512 characters). Even so, such variable width fields could still suffer truncation. See topic 5c. SCROLLING a Window for additional information on accessing any truncated data.

25. SUPGRPS  --  Supplementary Group Names
    The names of any supplementary group(s) established at login or inherited from a task's parent. They are displayed in a comma delimited list. Note: The 'SUPGRPS' field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum 512 characters). Even so, such variable width fields could still suffer truncation. See topic 5c. SCROLLING a Window for additional information on accessing any truncated data.

26. SUSER  --  Saved User Name
    The saved user name.

27. SWAP  --  Swapped Size (KiB)
    The non-resident portion of a task's address space.

28. TGID  --  Thread Group Id
    The ID of the thread group to which a task belongs. It is the PID of the thread group leader. In kernel terms, it represents those tasks that share an 'mm_struct'.

29. TIME  --  CPU Time
    Total CPU time the task has used since it started. When 'Cumulative mode' is On, each process is listed with the cpu time that it and its dead children have used. You toggle 'Cumulative mode' with 'S', which is both a command-line option and an interactive command. See the 'S' interactive command for additional information regarding this mode.

30. TIME+  --  CPU Time, hundredths
    The same as 'TIME', but reflecting more granularity through hundredths of a second.

31. TPGID  --  Tty Process Group Id
    The process group ID of the foreground process for the connected tty, or -1 if a process is not connected to a terminal. By convention, this value equals the process ID (see PID) of the the process group leader (see PGRP).

32. TTY  --  Controlling Tty
    The name of the controlling terminal. This is usually the device (serial port, pty, etc.) from which the process was started, and which it uses for input or output. However, a task need not be associated with a terminal, in which case you'll see '?' displayed.

33. UID  --  User Id
    The effective user ID of the task's owner.

34. USER  --  User Name
    The effective user name of the task's owner.

35. VIRT  --  Virtual Memory Size (KiB)
    The total amount of virtual memory used by the task. It includes all code, data and shared libraries plus pages that have been swapped out and pages that have been mapped but not used.

36. WCHAN  --  Sleeping in Function
    Depending on the availability of the kernel link map ('System.map'), this field will show the name or the address of the kernel function in which the task is currently sleeping. Running tasks will display a dash ('-') in this column. By displaying this field, top's own working set could be increased by over 700Kb, depending on the kernel version. Should that occur, your only means of reducing that overhead will be to stop and restart top.

37. nDRT  --  Dirty Pages Count
    The number of pages that have been modified since they were last written to auxiliary storage. Dirty pages must be written to auxiliary storage before the corresponding physical memory location can be used for some other virtual page.

38. nMaj  --  Major Page Fault Count
    The number of major page faults that have occurred for a task. A page fault occurs when a process attempts to read from or write to a virtual page that is not currently present in its address space. A major page fault is when auxiliary storage access is involved in making that page available.

39. nMin  --  Minor Page Fault count
    The number of minor page faults that have occurred for a task. A page fault occurs when a process attempts to read from or write to a virtual page that is not currently present in its address space. A minor page fault does not involve auxiliary storage access in making that page available.

40. nTH  --  Number of Threads
    The number of threads associated with a process.

  3b. MANAGING Fields
After pressing the interactive command 'f' or 'F' (Fields Management) you will be presented with a screen showing: 1) the 'current' window name; 2) the designated sort field; 3) all fields in their current order along with descriptions. Entries marked with an asterisk are the currently displayed fields, screen width permitting.
    As the on screen instructions indicate, you navigate among the fields with the Up and Down arrow keys. The PgUp, PgDn, Home and End keys can also be used to quickly reach the first or last available field. The Right arrow key selects a field for repositioning and the Left arrow key or the <Enter> key commits that field's placement. The 'd' key or the <Space> bar toggles a field's display status, and thus the presence or absence of the asterisk. The 's' key designates a field as the sort field. See topic 4c. TASK AREA Commands, SORTING for additional information regarding your selection of a sort field. The 'a' and 'w' keys can be used to cycle through all available windows and the 'q' or <Esc> keys exit Fields Management.

        The Fields Management screen can also be used to change the 'current' window/field group in either full-screen mode or alternate-display mode. Whatever was targeted when 'q' or <Esc> was pressed will be made current as you return to the top display. See topic 5. ALTERNATE-DISPLAY Provisions and the 'g' interactive command for insight into 'current' windows and field groups.

        Note: Any window that has been scrolled horizontally will be reset if any field changes are made via the Fields Management screen. Any vertical scrolled position, however, will not be affected. See topic 5c. SCROLLING a Window for additional information regarding vertical and horizontal scrolling.

4. INTERACTIVE Commands
Listed below is a brief index of commands within categories. Some commands appear more than once -- their meaning or scope may vary depending on the context in which they are issued.
  4a. Global-Commands
        <Ent/Sp> ?, =, A, B, d, g, h, H, I, k, q, r, s, W, X, Z
  4b. Summary-Area-Commands
        C, l, t, 1, m
  4c. Task-Area-Commands
        Appearance: b, J, j, x, y, z
        Content: c, f, F, S, u, U, V
        Size: #, i, n
        Sorting: <, >, f, F, R
  4d. Color-Mapping
        <Ret>, a, B, b, H, M, q, S, T, w, z, 0 - 7
  5b. Commands-for-Windows
        -, _, =, +, A, a, g, G, w
  5c. Scrolling-a-Window
        C, Up, Dn, Left, Right, PgUp, PgDn, Home, End
  5d. Searching-in-a-Window
        L, &

  4a. GLOBAL Commands
The global interactive commands are always available in both full-screen mode and alternate-display mode. However, some of these interactive commands are not available when running in 'Secure mode'. If you wish to know in advance whether or not your top has been secured, simply ask for help and view the system summary on the second line.

<Enter> or <Space> :Refresh-Display
    These commands awaken top and following receipt of any input the entire display will be repainted. They also force an update of any hotplugged cpu or physical memory changes. Use either of these keys if you have a large delay interval and wish to see current status,

'?' | 'h' :Help
    There are two help levels available. The first will provide a reminder of all the basic interactive commands. If top is secured, that screen will be abbreviated. Typing 'h' or '?' on that help screen will take you to help for those interactive commands applicable to alternate-display mode.

'=' :Exit-Task-Limits
    Removes restrictions on which tasks are shown. This command will reverse any 'i' (idle tasks) and 'n' (max tasks) commands that might be active. It also provides for an 'exit' from pid monitoring and user filtering. See the '-p' command-line option for a discussion of PID monitoring and the 'U' or 'u' interactive commands regarding user filtering. Additionally, any window that has been scrolled will be reset with this command. See topic 5c. SCROLLING a Window for additional information regarding vertical and horizontal scrolling. When operating in alternate-display mode this command has a broader meaning.

'A' :Alternate-Display-Mode toggle
    This command will switch between full-screen mode and alternate-display mode. See topic 5. ALTERNATE-DISPLAY Provisions and the 'g' interactive command for insight into 'current' windows and field groups.

'B' :Bold-Disable/Enable toggle
    This command will influence use of the 'bold' terminfo capability and alters both the summary area and task area for the 'current' window. While it is intended primarily for use with dumb terminals, it can be applied anytime. Note: When this toggle is On and top is operating in monochrome mode, the entire display will appear as normal text. Thus, unless the 'x' and/or 'y' toggles are using reverse for emphasis, there will be no visual confirmation that they are even on.

* 'd' | 's' :Change-Delay-Time-interval
    You will be prompted to enter the delay time, in seconds, between display updates. Fractional seconds are honored, but a negative number is not allowed. Entering 0 causes (nearly) continuous updates, with an unsatisfactory display as the system and tty driver try to keep up with top's demands. The delay value is inversely proportional to system loading, so set it with care. If at any time you wish to know the current delay time, simply ask for help and view the system summary on the second line.

'g' :Choose-Another-Window/Field-Group
    You will be prompted to enter a number between 1 and 4 designating the field group which should be made the 'current' window. You will soon grow comfortable with these 4 windows, especially after experimenting with alternate-display mode.

'H' :Threads-mode toggle
    When this toggle is On, individual threads will be displayed for all processes in all visible task windows. Otherwise, top displays a summation of all threads in each process.

'I' :Irix/Solaris-Mode toggle
    When operating in 'Solaris mode' ('I' toggled Off), a task's cpu usage will be divided by the total number of CPUs. After issuing this command, you'll be told the new state of this toggle.

* 'k' :Kill-a-task
    You will be prompted for a PID and then the signal to send. The default signal, as reflected in the prompt, is SIGTERM. However, you can send any signal, via number or name. If you wish to abort the kill process, do one of the following depending on your progress:
        1) at the pid prompt, just press <Enter>
        2) at the signal prompt, type 0

'q' :Quit

* 'r' :Renice-a-Task
    You will be prompted for a PID and then the value to nice it to. Entering a positive value will cause a process to lose priority. Conversely, a negative value will cause a process to be viewed more favorably by the kernel.

'W' :Write-the-Configuration-File
    This will save all of your options and toggles plus the current display mode and delay time. By issuing this command just before quitting top, you will be able restart later in exactly that same state.

'X' :Extra-Fixed-Width
    Some fields are fixed width and not scalable. As such, they are subject to truncation which would be indicated by a '+' in the last position. This interactive command can be used to alter the widths of the following fields:
        field default field default field default
        GID 5 GROUP 8 WCHAN 10
        RUID 5 RUSER 8
        SUID 5 SUSER 8
        UID 5 USER 8
                          TTY 8 You will be prompted for the amount to be added to the default widths shown above. Entering zero forces a return to those defaults. If you enter a negative number, top will automatically increase the column size as needed until there is no more truncated data. You can accelerate this process by reducing the delay interval or holding down the <Space> bar. Note: Whether explicitly or automatically increased, the widths for these fields are never decreased by top. To narrow them you must specify a smaller number or restore the defaults.

'Z' :Change-Color-Mapping
    This key will take you to a separate screen where you can change the colors for the 'current' window, or for all windows. For details regarding this interactive command see topic 4d. COLOR Mapping.

*   The commands shown with an asterisk ('*') are not available in 'Secure mode', nor will they be shown on the level-1 help screen.

  4b. SUMMARY AREA Commands
The summary area interactive commands are always available in both full-screen mode and alternate-display mode. They affect the beginning lines of your display and will determine the position of messages and prompts. These commands always impact just the 'current' window/field group. See topic 5. ALTERNATE-DISPLAY Provisions and the 'g' interactive command for insight into 'current' windows and field groups.

'l' :Load-Average/Uptime toggle
    This is also the line containing the program name (possibly an alias) when operating in full-screen mode or the 'current' window name when operating in alternate-display mode.

't' :Task/Cpu-States toggle
    This command affects from 2 to many summary area lines, depending on the state of the '1' toggle and whether or not top is running under true SMP. This portion of the summary area is also influenced by the 'H' interactive command toggle, as reflected in the total label which shows either 'Tasks' or 'Threads'.

'1' :Single/Separate-Cpu-States toggle
    This command affects how the 't' command's Cpu States portion is shown. Although this toggle exists primarily to serve massively-parallel SMP machines, it is not restricted to solely SMP environments. When you see '%Cpu(s):' in the summary area, the '1' toggle is On and all cpu information is gathered in a single line. Otherwise, each cpu is displayed separately as: '%Cpu0, %Cpu1, ...' up to available screen height.

'm' :Memory/Swap-Usage toggle
    This command affects the two summary area lines dealing with physical and virtual memory.

Note: If the entire summary area has been toggled Off for any window, you would be left with just the message line. In that way, you will have maximized available task rows but (temporarily) sacrificed the program name in full-screen mode or the 'current' window name when in alternate-display mode.

  4c. TASK AREA Commands
The task area interactive commands are always available in full-screen mode. The task area interactive commands are never available in alternate-display mode if the 'current' window's task display has been toggled Off (see topic 5. ALTERNATE-DISPLAY Provisions).

APPEARANCE of task window
'J' :Justify-Numeric-Columns toggle
    Alternates between right-justified (the default) and left-justified numeric data. If the numeric data completely fills the available column, this command toggle may impact the column header only.
'j' :Justify-Character-Columns toggle
    Alternates between left-justified (the default) and right-justified character data. If the character data completely fills the available column, this command toggle may impact the column header only.
    The following commands will also be influenced by the state of the global 'B' (bold enable) toggle.
        'b' :Bold/Reverse toggle
            This command will impact how the 'x' and 'y' toggles are displayed. Further, it will only be available when at least one of those toggles is On.
        'x' :Column-Highlight toggle
            Changes highlighting for the current sort field. If you forget which field is being sorted this command can serve as a quick visual reminder, providing the sort field is being displayed. The sort field might not be visible because:
                1) there is insufficient Screen Width
                2) the 'f' interactive command turned it Off
        'y' :Row-Highlight toggle
            Changes highlighting for "running" tasks. For additional insight into this task state, see topic 3a. DESCRIPTIONS of Fields, the 'S' field (Process Status). Use of this provision provides important insight into your system's health. The only costs will be a few additional tty escape sequences.
        'z' :Color/Monochrome toggle
            Switches the 'current' window between your last used color scheme and the older form of black-on-white or white-on-black. This command will alter both the summary area and task area but does not affect the state of the 'x', 'y' or 'b' toggles.
        CONTENT of task window
        'c' :Command-Line/Program-Name toggle
            This command will be honored whether or not the 'COMMAND' column is currently visible. Later, should that field come into view, the change you applied will be seen.
        'f' | 'F' :Fields-Management
            These keys display a separate screen where you can change which fields are displayed, their order and also designate the sort field. For additional information on these interactive commands see topic 3b. MANAGING Fields.
        'S' :Cumulative-Time-Mode toggle
            When 'Cumulative mode' is On, each process is listed with the cpu time that it and its dead children have used. When Off, programs that fork into many separate tasks will appear less demanding. For programs like 'init' or a shell this is appropriate but for others, like compilers, perhaps not. Experiment with two task windows sharing the same sort field but with different 'S' states and see which representation you prefer. After issuing this command, you'll be informed of the new state of this toggle. If you wish to know in advance whether or not 'Cumulative mode' is in effect, simply ask for help and view the window summary on the second line.
        'u' | 'U' :Show-Specific-User-Only
            You will be prompted for the uid or name of the user to display. The '-u' option matches on effective user whereas the '-U' option matches on any user (real, effective, saved, or filesystem). Thereafter, in that task window only matching users will be shown, or possibly no processes will be shown. Different task windows can can be used to filter different users. Later, if you wish to monitor all tasks again in the 'current' window, re-issue this command but just press <Enter> at the prompt.
        'V' :Forest-View-Mode toggle
            In this mode, processes are reordered according to their parents and the layout of the COMMAND column resembles that of a tree. In forest view mode it is still possible to toggle between program name and commamd line (see the 'c' interactive command) or between processes and threads (see the 'H' interactive command). Note: Typing any key affecting the sort order will exit forest view mode in the 'current' window. See topic 4c. TASK AREA Commands, SORTING for information on those keys.
        SIZE of task window
        'i' :Idle-Process toggle
            Displays all tasks or just active tasks. When this toggle is Off, tasks that have not used any CPU since the last update will not be displayed. However, due to the granularity of the %CPU and TIME+ fields, some processes may still be displayed that appear to have used no CPU. If this command is applied to the last task display when in alternate-display mode, then it will not affect the window's size, as all prior task displays will have already been painted.
        'n' | '#' :Set-Maximum-Tasks
            You will be prompted to enter the number of tasks to display. The lessor of your number and available screen rows will be used. When used in alternate-display mode, this is the command that gives you precise control over the size of each currently visible task display, except for the very last. It will not affect the last window's size, as all prior task displays will have already been painted. Note: If you wish to increase the size of the last visible task display when in alternate-display mode, simply decrease the size of the task display(s) above it.
        SORTING of task window
            For compatibility, this top supports most of the former top sort keys. Since this is primarily a service to former top users, these commands do not appear on any help screen.
               command sorted-field supported
                 A start time (non-display) No
                 M %MEM Yes
                 N PID Yes
                 P %CPU Yes
                 T TIME+ Yes Before using any of the following sort provisions, top suggests that you temporarily turn on column highlighting using the 'x' interactive command. That will help ensure that the actual sort environment matches your intent. The following interactive commands will only be honored when the current sort field is visible. The sort field might not be visible because:
                 1) there is insufficient Screen Width
                 2) the 'f' interactive command turned it Off
        '<' :Move-Sort-Field-Left
            Moves the sort column to the left unless the current sort field is the first field being displayed.
        '>' :Move-Sort-Field-Right
            Moves the sort column to the right unless the current sort field is the last field being displayed.
        The following interactive commands will always be honored whether or not the current sort field is visible.
        'f' | 'F' :Fields-Management
            These keys display a separate screen where you can change which field is used as the sort column, among other functions. This can be a convenient way to simply verify the current sort field, when running top with column highlighting turned Off.
        'R' :Reverse/Normal-Sort-Field toggle
            Using this interactive command you can alternate between high-to-low and low-to-high sorts.
        Note: Field sorting uses internal values, not those in column display. Thus, the TTY and WCHAN fields will violate strict ASCII collating sequence.

  4d. COLOR Mapping
When you issue the 'Z' interactive command, you will be presented with a separate screen. That screen can be used to change the colors in just the 'current' window or in all four windows before returning to the top display.
The following interactive commands are available.
    4 upper case letters to select a target
    8 numbers to select a color
    normal toggles available
        'B' :bold disable/enable
        'b' :running tasks "bold"/reverse
        'z' :color/mono
    other commands available
        'a'/'w' :apply, then go to next/prior
        <Enter> :apply and exit
        'q' :abandon current changes and exit If you use 'a' or 'w' to cycle the targeted window, you will have applied the color scheme that was displayed when you left that window. You can, of course, easily return to any window and reapply different colors or turn colors Off completely with the 'z' toggle. The Color Mapping screen can also be used to change the 'current' window/field group in either full-screen mode or alternate-display mode. Whatever was targeted when 'q' or <Enter> was pressed will be made current as you return to the top display.

5. ALTERNATE-DISPLAY Provisions

  5a. WINDOWS Overview
Field Groups/Windows:
    In full-screen mode there is a single window represented by the entire screen. That single window can still be changed to display 1 of 4 different field groups (see the 'g' interactive command, repeated below). Each of the 4 field groups has a unique separately configurable summary area and its own configurable task area. In alternate-display mode, those 4 underlying field groups can now be made visible simultaneously, or can be turned Off individually at your command. The summary area will always exist, even if it's only the message line. At any given time only one summary area can be displayed. However, depending on your commands, there could be from zero to four separate task displays currently showing on the screen.
Current Window:
    The 'current' window is the window associated with the summary area and the window to which task related commands are always directed. Since in alternate-display mode you can toggle the task display Off, some commands might be restricted for the 'current' window. A further complication arises when you have toggled the first summary area line Off. With the loss of the window name (the 'l' toggled line), you'll not easily know what window is the 'current' window.

  5b. COMMANDS for Windows
'-' | '_' :Show/Hide-Window(s) toggles
    The '-' key turns the 'current' window's task display On and Off. When On, that task area will show a minimum of the columns header you've established with the 'f' interactive command. It will also reflect any other task area options/toggles you've applied yielding zero or more tasks. The '_' key does the same for all task displays. In other words, it switches between the currently visible task display(s) and any task display(s) you had toggled Off. If all 4 task displays are currently visible, this interactive command will leave the summary area as the only display element.
* '=' | '+' :Equalize-(re-balance)-Window(s)
    The '=' key forces the 'current' window's task display to be visible. It also reverses any 'i' (idle tasks), 'n' (max tasks) and 'u'/'U' (user filter) commands that might be active. Also, if the window had been scrolled, it will be reset with this command. See topic 5c. SCROLLING a Window for additional information regarding vertical and horizontal scrolling. The '+' key does the same for all windows. The four task displays will reappear, evenly balanced. They will also have retained any customizations you had previously applied, except for the 'i' (idle tasks), 'n' (max tasks), 'u'/'U' (user filter) and scrolling interactive commands.
* 'A' :Alternate-Display-Mode toggle
    This command will switch between full-screen mode and alternate-display mode. The first time you issue this command, all four task displays will be shown. Thereafter when you switch modes, you will see only the task display(s) you've chosen to make visible.
* 'a' | 'w' :Next-Window-Forward/Backward
    This will change the 'current' window, which in turn changes the window to which commands are directed. These keys act in a circular fashion so you can reach any desired 'current' window using either key. Assuming the window name is visible (you have not toggled 'l' Off), whenever the 'current' window name loses its emphasis/color, that's a reminder the task display is Off and many commands will be restricted.
* 'g' :Choose-Another-Window/Field-Group
    You will be prompted to enter a number between 1 and 4 designating the field group which should be made the 'current' window. In full-screen mode, this command is necessary to alter the 'current' window. In alternate-display mode, it is simply a less convenient alternative to the 'a' and 'w' commands.
'G' :Change-Window/Field-Group-Name
    You will be prompted for a new name to be applied to the 'current' window. It does not require that the window name be visible (the 'l' toggle to be On).
*   The interactive commands shown with an asterisk ('*') have use beyond alternate-display mode.
        '=', 'A', 'g' are always available
        'a', 'w' act the same with color mapping
                       and fields management

  5c. SCROLLING a Window
Typically a task window is a partial view into a systems's total tasks/threads which shows only some of the available fields/columns. With these scrolling keys, you can move that view vertically or horizontally to reveal any desired task or column.
Up,PgUp :Scroll-Tasks
    Move the view up toward the first task row, until the first task is displayed at the top of the 'current' window. The Up arrow key moves a single line while PgUp scrolls the entire window.
Down,PgDn :Scroll-Tasks
    Move the view down toward the last task row, until the last task is the only task displayed at the top of the 'current' window. The Down arrow key moves a single line while PgDn scrolls the entire window.
Left,Right :Scroll-Columns
    Move the view of displayable fields horizontally one column at a time. Note: As a reminder, some fields/columns are not fixed-width but allocated all remaining screen width when visible. When scrolling right or left, that feature may produce some unexpected results initially. Additionally, there are special provisions for any variable width field when positioned as the last displayed field. Once that field is reached via the right arrow key, and is thus the only column shown, you can continue scrolling horizontally within such a field. See the 'C' interactive command below for additional information.
Home :Jump-to-Home-Position
    Reposition the display to the un-scrolled coordinates.
End :Jump-to-End-Position
    Reposition the display so that the rightmost column reflects the last displayable field and the bottom task row represents the last task. Note: From this position it is still possible to scroll down and right using the arrow keys. This is true until a single column and a single task is left as the only display element.
'C' :Show-scroll-coordinates toggle
    Toggle an informational message which is displayed whenever the message line is not otherwise being used. That message will take one of two forms depending on whether or not a variable width column has also been scrolled.
      scroll coordinates: y = n/n (tasks), x = n/n (fields)
      scroll coordinates: y = n/n (tasks), x = n/n (fields) + nn The coordinates shown as n/n are relative to the upper left corner of the 'current' window. The additional '+ nn' represents the displacement into a variable width column when it has been scrolled horizontally. Such displacement occurs in normal 8 character tab stop amounts via the right and left arrow keys.
    y = n/n (tasks)
        The first n represents the topmost visible task and is controlled by scrolling keys. The second n is updated automatically to reflect total tasks.
    x = n/n (fields)
        The first n represents the leftmost displayed column and is controlled by scrolling keys. The second n is the total number of displayable fields and is established with the 'f' interactive command.
        The above interactive commands are always available in full-screen mode but never available in alternate-display mode if the 'current' window's task display has been toggled Off.

  5d. SEARCHING in a Window
You can use these interactive commands to locate a task row containing a particular value.
'L' :Locate-a-string
    You will be prompted for the case-sensitive string to locate starting from the current window coordinates. There are no restrictions on search string content. Searches are not limited to values from a single field or column. All of the values displayed in a task row are allowed in a search string. You may include spaces, numbers, symbols and even forest view artwork. Keying <Enter> with no input will effectively disable the '&' key until a new search string is entered.
'&' :Locate-next
    Assuming a search string has been established, top will attempt to locate the next occurrence.
When a match is found, the current window is repositioned vertically so the task row containing that string is first. The scroll coordinates message can provide confirmation of such vertical repositioning (see the 'C' interactive command). Horizontal scrolling, however, is never altered via searching. The availability of a matching string will be influenced by the following factors.
    a. Which fields are displayable from the total available,
        see topic 3b. MANAGING Fields.
    b. Scrolling a window vertically and/or horizontally,
        see topic 5c. SCROLLING a Window.
    c. The state of the command/command-line toggle,
        see the 'c' interactive command.
    d. The stability of the chosen sort column,
        for example PID is good but %CPU bad.
        If a search fails, restoring the 'current' window home (unscrolled) position, scrolling horizontally, displaying command-lines or choosing a more stable sort field could yet produce a successful '&' search. The above interactive commands are always available in full-screen mode but never available in alternate-display mode if the 'current' window's task display has been toggled Off. Note: Whenever a search key is typed, top forces idle tasks On and user filtering Off to ensure that every task is encountered. See the 'i' and 'u/U' interactive commands for additional information on how displayed tasks might be filtered.

6. FILES

  6a. SYSTEM Configuration File
The presence of this file will influence which version of the 'help' screen is shown to an ordinary user. More importantly, it will limit what ordinary users are allowed to do when top is running. They will not be able to issue the following commands.
    k Kill a task
    r Renice a task
    d or s Change delay/sleep interval The system configuration file is not created by top. Rather, you create this file manually and place it in the /etc directory. Its name must be 'toprc' and must have no leading '.' (period). It must have only two lines. Here is an example of the contents of /etc/toprc:
    s # line 1: 'secure' mode switch
    5.0 # line 2: 'delay' interval in seconds

  6b. PERSONAL Configuration File
This file is written as '$HOME/.your-name-4-top' + 'rc'. Use the 'W' interactive command to create it or update it. Here is the general layout:
    global # line 1: the program name/alias notation
      " # line 2: id,altscr,irixps,delay,curwin
    per ea # line a: winname,fieldscur
    window # line b: winflags,sortindx,maxtasks
      " # line c: summclr,msgsclr,headclr,taskclr
    global # last : fixed-width incr If the $HOME variable is not present, top will try to write the personal configuration file to the current directory, subject to permissions.

7. STUPID TRICKS Sampler
Many of these 'tricks' work best when you give top a scheduling boost. So plan on starting him with a nice value of -10, assuming you've got the authority.

  7a. Kernel Magic
For these stupid tricks, top needs full-screen mode. The user interface, through prompts and help, intentionally implies that the delay interval is limited to tenths of a second. However, you're free to set any desired delay. If you want to see Linux at his scheduling best, try a delay of .09 seconds or less. For this experiment, under x-windows open an xterm and maximize it. Then do the following:
  . provide a scheduling boost and tiny delay via:
      nice -n -10 top -d.09
  . keep sorted column highlighting Off so as to
    minimize path length
  . turn On reverse row highlighting for emphasis
  . try various sort columns (TIME/MEM work well),
    and normal or reverse sorts to bring the most
    active processes into view What you'll see is a very busy Linux doing what he's always done for you, but there was no program available to illustrate this. Under an xterm using 'white-on-black' colors, on top's Color Mapping screen set the task color to black and be sure that task highlighting is set to bold, not reverse. Then set the delay interval to around .3 seconds. After bringing the most active processes into view, what you'll see are the ghostly images of just the currently running tasks. Delete the existing rcfile, or create a new symlink. Start this new version then type 'T' (a secret key, see topic 4c. Task Area Commands, SORTING) followed by 'W' and 'q'. Finally, restart the program with -d0 (zero delay). Your display will be refreshed at three times the rate of the former top, a 300% speed advantage. As top climbs the TIME ladder, be as patient as you can while speculating on whether or not top will ever reach the top.

  7b. Bouncing Windows
For these stupid tricks, top needs alternate-display mode. With 3 or 4 task displays visible, pick any window other than the last and turn idle processes Off using the 'i' command toggle. Depending on where you applied 'i', sometimes several task displays are bouncing and sometimes it's like an accordion, as top tries his best to allocate space. Set each window's summary lines differently: one with no memory ('m'); another with no states ('t'); maybe one with nothing at all, just the message line. Then hold down 'a' or 'w' and watch a variation on bouncing windows -- hopping windows. Display all 4 windows and for each, in turn, set idle processes to Off using the 'i' command toggle. You've just entered the "extreme bounce" zone.

  7c. The Big Bird Window
This stupid trick also requires alternate-display mode. Display all 4 windows and make sure that 1:Def is the 'current' window. Then, keep increasing window size with the 'n' interactive command until all the other task displays are "pushed out of the nest". When they've all been displaced, toggle between all visible/invisible windows using the '_' command toggle. Then ponder this:
   is top fibbing or telling honestly your imposed truth?

  7d. The Ol' Switcheroo
This stupid trick works best without alternate-display mode, since justification is active on a per window basis. Start top and make COMMAND the last (rightmost) column displayed. If necessary, use the 'c' command toggle to display command lines and ensure that forest view mode is active with the 'V' command toggle. Then use the up/down arrow keys to position the display so that some truncated command lines are shown ('+' in last position). You may have to resize your xterm to produce truncation. Lastly, use the 'j' command toggle to make the COMMAND column right justified. Now use the right arrow key to reach the COMMAND column. Continuing with the right arrow key, watch closely the direction of travel for the command lines being shown.
   some lines travel left, while others travel right
   eventually all lines will Switcheroo, and move right

8. BUGS
To report bugs, follow the instructions at:
    http://www.debian.org/Bugs/Reporting

9. HISTORY Former top
The original top was written by Roger Binns, based on Branko Lankester's <lankeste@fwi.uva.nl> ps program. Robert Nation <nation@rocket.sanders.lockheed.com> adapted it for the proc file system. Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de> added support for configurable fields. Plus many other individuals contributed over the years.

10. AUTHOR
This entirely new and enhanced replacement was written by:
    Jim Warner, <james.warner@comcast.net> With invaluable help from:
    Craig Small, <csmall@enc.com.au>
    Albert Cahalan, <albert@users.sf.net>

11. SEE Also
free(1), ps(1), uptime(1), atop(1), slabtop(1), vmstat(8), w(1).