--- libsendmail-milter-perl-0.18.orig/Makefile.PL
+++ libsendmail-milter-perl-0.18/Makefile.PL
@@ -5,13 +5,13 @@
 use ExtUtils::MakeMaker;
 use Config;
 
-if ((not $ARGV[0]) or (not $ARGV[1]))
-{
-	print "Usage: perl Makefile.PL <path-to-sendmail-source> <path-to-sendmail-obj.dir>\n";
-	print "(e.g. 'perl Makefile.PL ../sendmail ../sendmail/obj.FreeBSD.4.0-RELEASE.i386')\n";
-	print "\n";
-	exit;
-}
+# if ((not $ARGV[0]) or (not $ARGV[1]))
+# {
+# 	print "Usage: perl Makefile.PL <path-to-sendmail-source> <path-to-sendmail-obj.dir>\n";
+# 	print "(e.g. 'perl Makefile.PL ../sendmail ../sendmail/obj.FreeBSD.4.0-RELEASE.i386')\n";
+# 	print "\n";
+# 	exit;
+# }
 
 if (not $Config{usethreads})
 {
@@ -24,11 +24,16 @@
 my $SENDMAIL_PATH = MM->canonpath($ARGV[0]);
 my $SENDMAIL_OBJ_PATH = MM->canonpath($ARGV[1]);
 
-my $MILTER_LIB = MM->catdir($SENDMAIL_OBJ_PATH, "libmilter");
-my $SMUTIL_LIB = MM->catdir($SENDMAIL_OBJ_PATH, "libsmutil");
-my $SM_LIB = MM->catdir($SENDMAIL_OBJ_PATH, "libsm");
-my $MILTER_INCLUDE = MM->catdir($SENDMAIL_PATH, "include");
-my $SENDMAIL_INCLUDE = MM->catdir($SENDMAIL_PATH, "sendmail");
+# my $MILTER_LIB = MM->catdir($SENDMAIL_OBJ_PATH, "libmilter");
+my $MILTER_LIB = '/usr/lib/libmilter';
+# my $SMUTIL_LIB = MM->catdir($SENDMAIL_OBJ_PATH, "libsmutil");
+my $SMUTIL_LIB = '/usr/lib/libmilter';
+# my $SM_LIB = MM->catdir($SENDMAIL_OBJ_PATH, "libsm");
+my $SM_LIB = '/usr/lib/libmilter';
+# my $MILTER_INCLUDE = MM->catdir($SENDMAIL_PATH, "include");
+my $MILTER_INCLUDE= '/usr/include/libmilter';
+# my $SENDMAIL_INCLUDE = MM->catdir($SENDMAIL_PATH, "sendmail");
+my $SENDMAIL_INCLUDE = '';
 
 sub milter_configure
 {
@@ -37,7 +42,8 @@
 	my $ccflags;
 
 	# Standard milter libraries
-	$libs = "-L$MILTER_LIB -L$SMUTIL_LIB -L$SM_LIB -lmilter -lsmutil -lsm";
+#	$libs = "-L$MILTER_LIB -L$SMUTIL_LIB -L$SM_LIB -lmilter -lsmutil -lsm";
+	$libs = "-L/usr/lib/libmilter -lmilter -lsmutil -lsm";
 
 	# POSIX threads support.
 	if ($Config{libs} =~ /-lpthread/)
@@ -81,7 +87,6 @@
     'VERSION_FROM'	=> 'Milter.pm',
     'CONFIGURE'		=> \&milter_configure,
     'OBJECT'		=> '$(BASEEXT)$(OBJ_EXT) intpools$(OBJ_EXT) callbacks$(OBJ_EXT)',
-    'DEFINE'		=> '',
     'INC'		=> "-I$SENDMAIL_INCLUDE -I$MILTER_INCLUDE",
 );
 
--- libsendmail-milter-perl-0.18.orig/debian/changelog
+++ libsendmail-milter-perl-0.18/debian/changelog
@@ -0,0 +1,56 @@
+libsendmail-milter-perl (0.18-7b1) staging; urgency=low
+
+  * No-change rebuild against perl 5.18
+
+ -- Jon Severinsson <jon@severinsson.net>  Tue, 28 Jan 2014 22:25:01 +0100
+
+libsendmail-milter-perl (0.18-7) unstable; urgency=low
+
+  * "make test" fails randomly on some architectures, causing buildds to
+    exit with a "maybe-failed". I have not been able to reproduce those
+    errors on other machines with the same architectures. As of 0.18-7,
+    tests are still run (so I can try to get somebody to reproduce any
+    errors).
+
+ -- Hilko Bengen <bengen@debian.org>  Tue, 17 Feb 2004 23:46:52 +0100
+
+libsendmail-milter-perl (0.18-6) unstable; urgency=low
+
+  * Testing showed that module builds on ppc, too. Set "Architecture:
+    any", although I couldn't test on mips. I assume that all the build
+    problems were related to libmilter not being built with -fPIC.
+
+ -- Hilko Bengen <bengen@debian.org>  Tue, 17 Feb 2004 11:17:58 +0100
+
+libsendmail-milter-perl (0.18-5) unstable; urgency=low
+
+  * Re-enabled ia64 (Closes: #221775)
+
+ -- Hilko Bengen <bengen@debian.org>  Tue,  3 Feb 2004 13:22:28 +0100
+
+libsendmail-milter-perl (0.18-4) unstable; urgency=low
+
+  * Don't build on mips, powerpc, ia64. For now.
+
+ -- Hilko Bengen (Debian) <bengen@debian.org>  Wed, 19 Nov 2003 22:39:41 +0100
+
+libsendmail-milter-perl (0.18-3) unstable; urgency=low
+
+  * Make dependency on libmilter-dev versioned, since it is compiled with
+    -fPIC now. (Closes: #195857)
+  * Build on all architectures again.
+
+ -- Hilko Bengen (Debian) <bengen@debian.org>  Sun, 16 Nov 2003 18:11:48 +0100
+
+libsendmail-milter-perl (0.18-2) unstable; urgency=low
+
+  * Don't build on alpha, hppa, ia64. For now. (Closes: #195857)
+
+ -- Hilko Bengen <bengen@debian,org>  Thu,  9 Oct 2003 06:58:27 +0200
+
+libsendmail-milter-perl (0.18-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Hilko Bengen <bengen+debian@hilluzination.de>  Fri,  9 May 2003 16:33:07 +0200
+
--- libsendmail-milter-perl-0.18.orig/debian/control
+++ libsendmail-milter-perl-0.18/debian/control
@@ -0,0 +1,17 @@
+Source: libsendmail-milter-perl
+Section: perl
+Priority: optional
+Build-Depends: debhelper (>= 3.0.5), perl (>= 5.8.0-7), libmilter-dev (>= 8.12.10-5)
+Maintainer: Hilko Bengen <bengen@debian.org>
+Standards-Version: 3.6.1.0
+
+Package: libsendmail-milter-perl
+Architecture: any
+Depends: ${perl:Depends}, ${shlibs:Depends}
+Description:  Interface to Sendmail's Mail Filter API
+ Sendmail::Milter is a Perl extension to sendmail's Mail Filter API
+ (Milter).
+ .
+ With this module, Perl callbacks can be defined and registered with
+ the Milter engine. This module calls those perl callbacks using
+ interpreters from a threaded persistent interpreter pool.
--- libsendmail-milter-perl-0.18.orig/debian/copyright
+++ libsendmail-milter-perl-0.18/debian/copyright
@@ -0,0 +1,95 @@
+This is the Debian package for the Sendmail::Milter module.
+
+It was created by Hilko Bengen <bengen@debian.org> using
+dh-make-perl.
+
+The upstream author is Charles Ying <cying@cpan.org>.
+
+Sendmail::Milter is licensed under the same terms as sendmail itself. 
+The Sendmail license is included below.
+
+The interpreter pools portion (found in the intpools.c, intpools.h,
+and test.pl files) of this code is also available under the same terms
+as perl itself. See /usr/share/doc/perl/copyright for details.
+
+------------------------------------------------------------------------
+
+			     SENDMAIL LICENSE
+
+The following license terms and conditions apply, unless a different
+license is obtained from Sendmail, Inc., 6425 Christie Ave, Fourth Floor,
+Emeryville, CA 94608, or by electronic mail at license@sendmail.com.
+
+License Terms:
+
+Use, Modification and Redistribution (including distribution of any
+modified or derived work) in source and binary forms is permitted only if
+each of the following conditions is met:
+
+1. Redistributions qualify as "freeware" or "Open Source Software" under
+   one of the following terms:
+
+   (a) Redistributions are made at no charge beyond the reasonable cost of
+       materials and delivery.
+
+   (b) Redistributions are accompanied by a copy of the Source Code or by an
+       irrevocable offer to provide a copy of the Source Code for up to three
+       years at the cost of materials and delivery.  Such redistributions
+       must allow further use, modification, and redistribution of the Source
+       Code under substantially the same terms as this license.  For the
+       purposes of redistribution "Source Code" means the complete compilable
+       and linkable source code of sendmail including all modifications.
+
+2. Redistributions of source code must retain the copyright notices as they
+   appear in each source code file, these license terms, and the
+   disclaimer/limitation of liability set forth as paragraph 6 below.
+
+3. Redistributions in binary form must reproduce the Copyright Notice,
+   these license terms, and the disclaimer/limitation of liability set
+   forth as paragraph 6 below, in the documentation and/or other materials
+   provided with the distribution.  For the purposes of binary distribution
+   the "Copyright Notice" refers to the following language:
+   "Copyright (c) 1998-2000 Sendmail, Inc.  All rights reserved."
+
+4. Neither the name of Sendmail, Inc. nor the University of California nor
+   the names of their contributors may be used to endorse or promote
+   products derived from this software without specific prior written
+   permission.  The name "sendmail" is a trademark of Sendmail, Inc.
+
+5. All redistributions must comply with the conditions imposed by the
+   University of California on certain embedded code, whose copyright
+   notice and conditions for redistribution are as follows:
+
+   (a) Copyright (c) 1988, 1993 The Regents of the University of
+       California.  All rights reserved.
+
+   (b) Redistribution and use in source and binary forms, with or without
+       modification, are permitted provided that the following conditions
+       are met:
+
+      (i)   Redistributions of source code must retain the above copyright
+            notice, this list of conditions and the following disclaimer.
+
+      (ii)  Redistributions in binary form must reproduce the above
+            copyright notice, this list of conditions and the following
+            disclaimer in the documentation and/or other materials provided
+            with the distribution.
+
+      (iii) Neither the name of the University nor the names of its
+            contributors may be used to endorse or promote products derived
+            from this software without specific prior written permission.
+
+6. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY
+   SENDMAIL, INC. AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+   NO EVENT SHALL SENDMAIL, INC., THE REGENTS OF THE UNIVERSITY OF
+   CALIFORNIA OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+   NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+   ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+   THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+$Revision: 1.3 $, Last updated $Date: 2003/11/16 17:13:29 $
--- libsendmail-milter-perl-0.18.orig/debian/examples
+++ libsendmail-milter-perl-0.18/debian/examples
@@ -0,0 +1 @@
+sample.pl
--- libsendmail-milter-perl-0.18.orig/debian/rules
+++ libsendmail-milter-perl-0.18/debian/rules
@@ -0,0 +1,91 @@
+#!/usr/bin/make -f
+#-*- makefile -*-
+# Made with the aid of dh_make, by Craig Small
+# Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess.
+# Some lines taken from debmake, by Christoph Lameter.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+export DH_COMPAT=3
+
+PACKAGE=$(shell dh_listpackages)
+
+ifndef PERL
+PERL = /usr/bin/perl
+endif
+
+ifndef DESTDIR
+DESTDIR=..
+endif
+TMP     =`pwd`/debian/$(PACKAGE)
+
+OPTIMIZE = -O2 -Wall
+ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+OPTIMIZE += -g
+endif
+
+build: build-stamp
+build-stamp:
+	dh_testdir
+
+	$(PERL) Makefile.PL INSTALLDIRS=vendor
+	$(MAKE) OPTIMIZE="$(OPTIMIZE)" LD_RUN_PATH=""
+	-$(MAKE) test
+
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp
+
+	-$(MAKE) realclean
+
+	dh_clean
+
+install: 
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	# We will install sample.pl as documentation, thank you.
+	-rm -f blib/lib/Sendmail/sample.pl
+	$(MAKE) install PREFIX=$(TMP)/usr
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+#	dh_testversion
+	dh_testdir
+	dh_testroot
+	dh_installdocs README TODO
+	dh_installexamples 
+	dh_installmenu
+#	dh_installemacsen
+#	dh_installinit
+	dh_installcron
+	dh_installman
+#	dh_undocumented
+	dh_installchangelogs Changes
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+#	dh_makeshlibs
+	dh_installdeb
+	dh_perl 
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb --destdir=$(DESTDIR)
+
+source diff:                                                                  
+	@echo >&2 'source and diff are obsolete - use dpkg-source -b'; false
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary
